Department of Mechanical Engineering, University of Connecticut, 191 Auditorium Road, Unit 3139, Storrs, Connecticut 06269, USA.
Soft Matter. 2021 Jan 7;17(1):40-56. doi: 10.1039/d0sm01637c. Epub 2020 Dec 7.
We investigate the circulation of nano- and micro-particles, including spherical particles and filamentous nanoworms, with red blood cells (RBCs) suspension in a constricted channel that mimics a stenosed microvessel. Through three-dimensional simulations using the immersed boundary-based Lattice Boltzmann method, the influence of channel geometries, such as the length and ratio of the constriction, on the accumulation of particles is systematically studied. Firstly, we find that the accumulation of spherical particles with 1 μm diameter in the constriction increases with the increases of both the length and ratio of the constriction. This is attributed to the interaction between spheres and RBCs. The RBCs "carry" the spheres and they accumulate inside the constriction together, due to the altered local hydrodynamics induced by the existence of the constriction. Secondly, nanoworms demonstrate higher accumulation than that of spheres inside the constriction, which is associated with the escape of nanoworms from RBC clusters and their accumulation near the wall of main channel. The accumulated near-wall nanoworms will eventually enter the constriction, thus enhancing their concentration inside the constriction. However, an exceptional case occurs in the case of constrictions with large ratio and long length. In such circumstances, the RBCs aggregate together tightly and concentrate at the center of the channel, which makes the nanoworms hardly able to escape from RBC clusters, leading to a similar accumulation of nanoworms and spheres inside the constriction. This study may provide theoretical guidance for the design of nano- and micro-particles for biomedical engineering applications, such as drug delivery systems for patients with stenosed microvessels.
我们研究了纳米和微米颗粒(包括球形颗粒和丝状纳米蠕虫)在模拟狭窄微血管的约束通道中与红细胞(RBC)悬浮液的循环。通过基于浸入边界的格子玻尔兹曼方法进行三维模拟,系统研究了通道几何形状(如约束的长度和比)对颗粒积累的影响。首先,我们发现 1μm 直径的球形颗粒在约束处的积累随着约束的长度和比的增加而增加。这归因于球与 RBC 之间的相互作用。由于约束的存在改变了局部流场,RBC 会“携带”球体并一起在约束处积累。其次,纳米蠕虫在约束处的积累比球体高,这与纳米蠕虫从 RBC 簇中逃逸并在主通道壁附近积累有关。靠近壁面的积累纳米蠕虫最终将进入约束处,从而增加约束处的浓度。然而,在具有大比例和长长度的约束情况下会出现异常情况。在这种情况下,RBC 紧密聚集并集中在通道中心,使得纳米蠕虫难以从 RBC 簇中逃逸,导致约束处纳米蠕虫和球体的积累相似。这项研究可为用于狭窄微血管患者的药物输送系统等生物医学工程应用的纳米和微颗粒的设计提供理论指导。