Department of Biomedical Engineering and Mechanics, Virginia Polytechnic Institute and State University, Blacksburg, Virginia, USA.
Department of Biomedical Engineering and Mechanics, Virginia Polytechnic Institute and State University, Blacksburg, Virginia, USA.
Ultrasound Med Biol. 2021 Mar;47(3):620-639. doi: 10.1016/j.ultrasmedbio.2020.10.020. Epub 2020 Dec 10.
The study described here examined the effects of cavitation nuclei characteristics on histotripsy. High-speed optical imaging was used to compare bubble cloud behavior and ablation capacity for histotripsy generated from intrinsic and artificial cavitation nuclei (gas-filled microbubbles, fluid-filled nanocones). Results showed a significant decrease in the cavitation threshold for microbubbles and nanocones compared with intrinsic-nuclei controls, with predictable and well-defined bubble clouds generated in all cases. Red blood cell experiments showed complete ablations for intrinsic and nanocone phantoms, but only partial ablation in microbubble phantoms. Results also revealed a lower rate of ablation in artificial-nuclei phantoms because of reduced bubble expansion (and corresponding decreases in stress and strain). Overall, this study demonstrates the potential of using artificial nuclei to reduce the histotripsy cavitation threshold while highlighting differences in the bubble cloud behavior and ablation capacity that need to be considered in the future development of these approaches.
本研究考察了空化核特性对 histotripsy 的影响。高速光学成象用于比较由固有和人工空化核(充气体微泡、充液纳米锥)产生的 histotripsy 的气泡云行为和消融能力。结果表明,与固有核对照相比,微泡和纳米锥的空化阈值显著降低,所有情况下都产生了可预测且明确的气泡云。红细胞实验表明,固有核和纳米锥模型完全消融,但微泡模型仅部分消融。结果还表明,由于气泡膨胀减少(相应的应力和应变减小),人工核模型的消融率较低。总体而言,本研究证明了使用人工核来降低 histotripsy 空化阈值的潜力,同时强调了在未来开发这些方法时需要考虑的气泡云行为和消融能力的差异。