Thin films of formamidinium lead iodide (FAPI) deposited using aerosol assisted chemical vapour deposition (AACVD).

Formamidinium lead iodide (CH(NH)PbI, FAPI) thin films have been deposited on glass substrates at 150 °C using ambient pressure aerosol assisted chemical vapour deposition (AACVD). The films have been analysed by a range of techniques including powder X-ray diffraction (pXRD), scanning electron microscopy (SEM), energy dispersive X-ray (EDX) spectroscopy, and UV-Vis-NIR absorption spectroscopy. Sharp reflections in the pXRD pattern can be indexed to the α-phase of FAPI which confirms the crystallinity of the as-deposited film and reveals a preferred growth orientation along the (002) plane with respect to the substrate. High magnification SEM images show that the thin film is comprised of a network of intimately connected FAPI crystallites which form a mesoporous architecture. EDX mapping of lead and iodine emission peaks show that the Pb and I within these films are spatially co-localised. Optical measurements show as-deposited FAPI films have absorption onsets in the near infra-red with a direct bandgap value of 1.46 eV, suitable for single junction solar cells. Four-point probe measurement of as deposited films show that the electrical conductivity (σ) of the FAPI thin film is 5.2 × 10 S/cm, which is similar to FAPI thin films deposited by spin coating technique.