Suppr超能文献

羟基磷灰石和缺氧对3D生物打印负载脂肪来源间充质干细胞构建物中软骨生成和肥大的影响

Effects of Hydroxyapatite and Hypoxia on Chondrogenesis and Hypertrophy in 3D Bioprinted ADMSC Laden Constructs.

作者信息

Wang Ying, Wu Shaohua, Kuss Mitchell A, Streubel Philipp N, Duan Bin

机构信息

Mary & Dick Holland Regenerative Medicine Program, University of Nebraska Medical Center, South 42nd Street & Emile Street, Omaha, Nebraska 68198, United States.

Division of Cardiology, Department of Internal Medicine, University of Nebraska Medical Center, South 42nd Street & Emile Street, Omaha, Nebraska 68198, United States.

出版信息

ACS Biomater Sci Eng. 2017 May 8;3(5):826-835. doi: 10.1021/acsbiomaterials.7b00101. Epub 2017 Mar 29.

Abstract

Hydrogel-based cartilage tissue engineering strategies require the induction and long-term maintenance of adipose derived mesenchymal stem cells (ADMSC) into a stable chondrogenic phenotype. However, ADMSC exhibit the tendency to undergo hypertrophic differentiation, rather than forming permanent hyaline cartilage phenotype changes. This may hinder their implementation in articular cartilage regeneration, but may allow the possibility for bone and bone to soft tissue interface repair. In this study, we examined the effects of hydroxyapatite (HAp) on the chondrogenesis and hypertrophy of ADMSC within bioprinted hyaluronic acid (HA)-based hydrogels. We found that a small amount of HAp (∼10% of polymer concentration) promoted both chondrogenic and hypertrophic differentiation of ADMSC. Increased HAp contents promoted hypertrophic conversion and early osteogenic differentiation of encapsulated ADMSC. Subsequently, ADMSC-laden, stratified constructs with nonmineralized and mineralized layers (i.e., HA based and HA-HAp based) were 3D bioprinted. The constructs were conditioned in chondrogenic medium in either a normoxic or hypoxic environment for 8 weeks to assess the effects of oxygen tension on ADMSC differentiation and interface integration. We further implanted the bioprinted constructs subcutaneously into nude mice for 4 weeks. It was found that hypoxia partially inhibited hypertrophic differentiation by significantly down-regulating the expression of COL10A1, ALP, and MMP13. In addition, hypoxia also suppressed spontaneous calcification of ADMSC and promoted interface integration. This study demonstrates that both HAp content and hypoxia are important to mediate chondrogenesis, hypertrophy, and endochondral ossification of ADMSC. An optimized recipe and condition will allow for 3D bioprinting of multizonal grafts with integrated hard tissue and soft tissue interfaces for the treatment of complex orthopedic defects.

摘要

基于水凝胶的软骨组织工程策略需要将脂肪来源的间充质干细胞(ADMSC)诱导并长期维持为稳定的软骨生成表型。然而,ADMSC有发生肥大分化的倾向,而不是形成永久性的透明软骨表型变化。这可能会阻碍它们在关节软骨再生中的应用,但可能为骨和骨与软组织界面的修复提供可能性。在本研究中,我们研究了羟基磷灰石(HAp)对生物打印的基于透明质酸(HA)的水凝胶中ADMSC软骨生成和肥大的影响。我们发现少量的HAp(约占聚合物浓度的10%)促进了ADMSC的软骨生成和肥大分化。增加的HAp含量促进了封装的ADMSC的肥大转化和早期成骨分化。随后,3D生物打印了具有非矿化层和矿化层(即基于HA和基于HA-HAp)的负载ADMSC的分层构建体。将构建体在常氧或低氧环境中的软骨生成培养基中培养8周,以评估氧张力对ADMSC分化和界面整合的影响。我们进一步将生物打印的构建体皮下植入裸鼠体内4周。发现低氧通过显著下调COL10A1、ALP和MMP13的表达部分抑制了肥大分化。此外,低氧还抑制了ADMSC的自发钙化并促进了界面整合。本研究表明,HAp含量和低氧对于介导ADMSC的软骨生成、肥大和软骨内成骨都很重要。优化的配方和条件将允许3D生物打印具有整合硬组织和软组织界面的多区域移植物,用于治疗复杂的骨科缺损。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验