Biophotonics Lab, Department of Bioengineering, Birla Institute of Technology-Mesra, Ranchi, Jharkhand, 835215, India.
Department of Pharmaceutical Sciences and Technology, Birla Institute of Technology-Mesra, Ranchi, Jharkhand, 835215, India.
Lasers Surg Med. 2021 Aug;53(6):815-829. doi: 10.1002/lsm.23374. Epub 2021 Jan 15.
The study presents a noninvasive, real-time monitoring technique for the cross-sectional imaging of the laser-tissue soldering process with a swept-source optical coherence tomography (SSOCT) system. The study also aims at performing a comparative study of the laser-tissue soldering (LTS) process using optimized compositions of albumin as solder biomaterials.
STUDY DESIGN/MATERIALS AND METHODS: The experimental study was conducted both ex vivo and in vivo to assess the superiority of the LTS process over conventional methods using a noninvasive imaging tool. In our attempt to combine the two techniques into one diagnostic tool, we have used the SSOCT system for a thoroughgoing investigation of the process in real-time. Laser-assisted tissue soldering was performed using a pulsed near-infrared (NIR) laser with a central wavelength of 980 nm, an output power of 5 W, and beam diameter (1/e ) of 6 mm. Here, the SSOCT system has been utilized to observe and analyze the transitions taking place in real-time without disrupting the process. For the comparative study, we have used serum albumin in a 70% w/v concentration and albumin-PEG conjugate in a 6:1 ratio as soldering materials. Different stages of the laser interaction process were monitored with OCT B-scans of the incision area. Also, the basis of biomaterial-tissue interaction was studied with the help of Fourier-transform infrared spectroscopy (FTIR) analysis of the soldering materials.
FTIR spectrum alludes to the fact that the intertwining of the soldering biomaterial with tissue collagen creates adhesion. Biomaterial serum albumin with 70% w/v concentration as soldering material demonstrates complete sealing of tissue at the incision with 3 minutes of laser irradiation. SSOCT B-scans have been useful in imaging the incision noninvasively at different stages.
Both ex vivo and in vivo demonstration of the LTS process were presented with a clinical resemblance. OCT can be of great value to determine the wound contraction in case of incisional wounds or sealed wounds produced by the LTS procedure. Also, volumetric measurements of percentage reduction in wound area can be done with OCT. SSOCT system can be a potential imaging modality for real-time noninvasive imaging of surgical procedures like LTS. Lasers Surg. Med. © 2021 Wiley Periodicals LLC.
本研究提出了一种非侵入式、实时监测技术,利用扫频源光学相干断层扫描(SSOCT)系统对激光组织焊接过程进行横截面成像。本研究还旨在使用优化的白蛋白作为焊接生物材料对激光组织焊接(LTS)过程进行对比研究。
本实验研究采用离体和体内实验,使用非侵入性成像工具评估 LTS 工艺优于传统方法的优势。为了将这两种技术结合成一种诊断工具,我们使用 SSOCT 系统对该过程进行实时、全面的研究。激光辅助组织焊接采用中心波长为 980nm、输出功率为 5W、光束直径(1/e )为 6mm 的脉冲近红外(NIR)激光进行。在这里,SSOCT 系统用于实时观察和分析正在发生的转变,而不会干扰该过程。为了进行对比研究,我们使用了 70% w/v 浓度的血清白蛋白和 6:1 比例的白蛋白-PEG 缀合物作为焊接材料。使用 OCT B 扫描监测激光相互作用过程的不同阶段。此外,还通过对焊接材料的傅里叶变换红外光谱(FTIR)分析研究了生物材料-组织相互作用的基础。
FTIR 谱表明,焊接生物材料与组织胶原交织在一起会产生粘连。作为焊接材料的 70% w/v 浓度的血清白蛋白在 3 分钟的激光照射下完全密封了切口处的组织。SSOCT B 扫描可用于在不同阶段对切口进行非侵入性成像。
本研究从离体和体内两个方面展示了 LTS 工艺,与临床情况相似。OCT 可以很好地确定切口处的伤口收缩,或者由 LTS 程序产生的密封伤口。此外,还可以使用 OCT 对伤口面积减少的百分比进行体积测量。SSOCT 系统可以成为一种很有前途的实时非侵入性成像模式,适用于 LTS 等手术程序。激光外科学杂志。