Opt Lett. 2021 Feb 15;46(4):753-756. doi: 10.1364/OL.415285.
Scanning imaging systems are susceptible to image warping in the presence of target motion occurring within the time required to acquire an individual image frame. In this Letter, we introduce the use of a dual raster scanning approach to correct for motion distortion without the need for prior knowledge of the undistorted image. In the dual scanning approach, the target is imaged simultaneously with two imaging beams from the same imaging system. The two imaging beams share a common pupil but have a spatial shift between the beams on the imaging plane. The spatial shift can be used to measure high speed events, because it measures an identical region at two different times within the time required for acquisition of a single frame. In addition, it provides accurate spatial information, since two different regions on the target are imaged simultaneously, providing an undistorted estimate of the spatial relation between regions. These spatial and temporal relations accurately measure target motion. Data from adaptive optics scanning laser ophthalmoscope (AOSLO) imaging of the human retina are used to demonstrate this technique. We apply the technique to correct the shearing of retinal images produced by eye motion. Three control subjects were measured while imaging different retinal layers and retinal locations to qualify the effectiveness of the algorithm. Since the time shift between channels is readily adjustable, this method can be tuned to match different imaging situations. The major requirement is the need to separate the two images; in our case, we used different near infrared spectral regions and dichroic filters.
扫描成像系统在获取单个图像帧所需的时间内,如果目标发生运动,则容易出现图像变形。在本信中,我们介绍了使用双光栅扫描方法来校正运动失真,而无需先验了解未失真的图像。在双扫描方法中,目标同时被来自同一成像系统的两个成像光束成像。这两个成像光束共享一个公共瞳孔,但在成像平面上的光束之间存在空间移位。空间移位可用于测量高速事件,因为它在获取单个帧所需的时间内的两个不同时间测量相同的区域。此外,它提供了准确的空间信息,因为目标上的两个不同区域同时被成像,提供了两个区域之间空间关系的无失真估计。这些空间和时间关系准确地测量了目标运动。使用自适应光学扫描激光检眼镜(AOSLO)对人视网膜的成像数据来演示该技术。我们应用该技术来校正眼动引起的视网膜图像的剪切。对三个对照受试者进行了测量,以在不同的视网膜层和视网膜位置进行成像,以确定算法的有效性。由于通道之间的时间移位很容易调整,因此可以根据不同的成像情况调整该方法。主要要求是需要分离两个图像;在我们的情况下,我们使用了不同的近红外光谱区域和二向色滤光片。