Armauer Hansen Research Institute, Addis Ababa, Ethiopia.
PLoS One. 2021 Feb 26;16(2):e0247767. doi: 10.1371/journal.pone.0247767. eCollection 2021.
The coronavirus disease 2019 (COVID-19) pandemic has revealed the global public health importance of robust diagnostic testing. To overcome the challenge of nucleic acid (NA) extraction and testing kit availability, an efficient method is urgently needed.
To establish an efficient, time and resource-saving and cost-effective methods, and to propose an ad hoc pooling approach for mass screening of SARS-CoV-2.
We evaluated pooling approach on both direct clinical and NA samples. The standard reverse transcriptase polymerase chain reaction (RT-PCR) test of the SARS CoV-2 was employed targeting the nucleocapsid (N) and open reading frame (ORF1ab) genomic region of the virus. The experimental pools were created using SARS CoV-2 positive clinical samples and extracted RNA spiked with up to 9 negative samples. For the direct clinical samples viral NA was extracted from each pool to a final extraction volume of 200μL, and subsequently both samples tested using the SARS CoV-2 RT-PCR assay.
We found that a single positive sample can be amplified and detected in pools of up to 7 samples depending on the cycle threshold (Ct) value of the original sample, corresponding to high, and low SARS CoV-2 viral copies per reaction. However, to minimize false negativity of the assay with pooling strategies and with unknown false negativity rate of the assay under validation, we recommend pooling of 4/5 in 1 using the standard protocols of the assay, reagents and equipment. The predictive algorithm indicated a pooling ratio of 5 in 1 was expected to retain accuracy of the test irrespective of the Ct value samples spiked, and result in a 137% increase in testing efficiency.
The approaches showed its concept in easily customized and resource-saving manner and would allow expanding of current screening capacities and enable the expansion of detection in the community. We recommend clinical sample pooling of 4 or 5 in 1. However, we don't advise pooling of clinical samples when disease prevalence is greater than 7%; particularly when sample size is large.
2019 年冠状病毒病(COVID-19)大流行凸显了强大诊断检测对全球公共卫生的重要性。为了克服核酸(NA)提取和检测试剂盒可用性的挑战,迫切需要一种有效的方法。
建立一种高效、省时、省力、经济有效的方法,并提出一种用于 SARS-CoV-2 大规模筛查的特殊混合方法。
我们评估了直接临床和 NA 样本的混合方法。采用针对病毒核衣壳(N)和开放阅读框(ORF1ab)基因组区域的标准 SARS-CoV-2 逆转录酶聚合酶链反应(RT-PCR)检测病毒。实验池由 SARS-CoV-2 阳性临床样本和用最多 9 个阴性样本提取的 RNA 混合而成。对于直接临床样本,从每个池中提取病毒 NA,最终提取体积为 200μL,然后用 SARS-CoV-2 RT-PCR 检测试剂盒检测两个样本。
我们发现,根据原始样本的循环阈值(Ct)值,单个阳性样本可以在多达 7 个样本的池中扩增和检测,这对应于每个反应中高和低 SARS-CoV-2 病毒拷贝数。然而,为了最大限度地减少混合策略的假阴性率,并且在验证中不确定检测的假阴性率,我们建议在使用检测试剂盒、试剂和设备的标准方案时,以 4/5 的比例混合。预测算法表明,无论样本中添加的 Ct 值如何,5 比 1 的混合比例预计都能保持检测的准确性,并使检测效率提高 137%。
该方法以易于定制和节省资源的方式展示了其概念,并且可以扩大当前的筛查能力,并使社区检测得以扩展。我们建议临床样本以 4 比 1 或 5 比 1 的比例混合。但是,当疾病流行率大于 7%,特别是样本量较大时,我们不建议对临床样本进行混合。