Analytical and Environmental Science Division & Centralized Instrument Facility, CSIR-Central Salt & Marine Chemicals Research Institute, Bhavnagar, 364 002, Gujarat, India.
Department of Chemical Engineering, Sri Sivasubramaniya Nadar College of Engineering, Chennai, 603 110, Tamil Nadu, India.
Chemosphere. 2021 Aug;276:130136. doi: 10.1016/j.chemosphere.2021.130136. Epub 2021 Mar 1.
Biosorbent from pods of Arachis hypogaea (AhP) were inducted with sulphuric acid treatment and then the activated materials were employed to sequester a sulphonated textile dye; Reactive Orange 16 (RO16) from water system. The characteristic features of the surface functionalized AhP (Ct-AhP) were analysed using instrumentation techniques. The biosorption influencing variables like operating pH, agitating time, initial RO16 concentration and temperature effects were investigated. One-factor optimization revealed that 0.5 g Ct-AhP was sufficient to achieve maximum removal of RO16 (20-120 mg/L) within 180 min agitation at 150 rpm. The isotherm data were applied to non-linear isotherms viz., Freundlich, Langmuir and Temkin models as well as rate limiting steps were elucidated using kinetic models. Freundlich isotherm showed good fit and pseudo-second order kinetic data explained RO16 removal by Ct-AhP followed chemisorption. The outcome of thermodynamic parametric values infer that RO16 biosorption was spontaneous, feasible and involved exothermic type of heat. Elovich and intraparticle diffusion revealed the biosorption mechanisms. The maximum RO16 biosorption (56.48 mg/g) by 0.5 g Ct-AhP were witnessed in the system containing 120 mg/L RO16 agitated at 150 rpm operating at pH 7.0, 303 K for a span of 180 min. Thus, the Ct-AhP is considered to be a promising biosorbent which can be employed in treating the textile effluents.
花生豆荚来源的生物吸附剂(AhP)经硫酸处理诱导后,再将活化材料用于从水系中螯合磺化纺织染料;活性艳橙 16(RO16)。采用仪器技术分析了表面功能化 AhP(Ct-AhP)的特征。考察了操作 pH、搅拌时间、初始 RO16 浓度和温度影响等生物吸附影响因素。单因素优化表明,0.5g Ct-AhP 在 150rpm 搅拌 180min 内足以实现 RO16(20-120mg/L)的最大去除。等温线数据应用于非线性等温线,如 Freundlich、Langmuir 和 Temkin 模型,以及通过动力学模型阐明了限速步骤。Freundlich 等温线拟合较好,伪二阶动力学数据解释了 Ct-AhP 对 RO16 的去除遵循化学吸附。热力学参数值的结果表明,RO16 的生物吸附是自发、可行的,涉及放热型热。Elovich 和内扩散揭示了生物吸附机制。在 120mg/L RO16 的体系中,在 pH 7.0、303K 下以 150rpm 搅拌 180min,0.5g Ct-AhP 对 RO16 的最大吸附量(56.48mg/g)。因此,Ct-AhP 被认为是一种很有前途的生物吸附剂,可用于处理纺织废水。