Preparation and characterization of cyclic citrullinated peptide-immobilized latex beads for measurement of anti-citrillinated protein antibody through latex particle-enhanced turbidimetric immunoassay.

The anti-citrillinated protein antibody (ACPA) plays an important role in early diagnosis of rheumatoid arthritis (RA), and is usually detected by using cyclic citrullinated peptide (CCP) as antigen. The ACPA against CCP test is usually performed utilizing enzyme-linked immunosorbent assay (ELISA), but the ELISA is expensive and time-consuming. Here, latex particle-enhanced turbidimetric immunoassay (LTIA) based on CCP-immobilized latex bead was proposed for fast measurements of ACPA of RA patients. CCP-immobilized latex bead was fabricated through three methods, including direct coupling, overall coupling and layer by layer coupling. According to the optimized experiments, layer-by-layer coupling was the best method with advantages of time-saving, simple operation and good repeatability. In addition, a spacer arm of appropriate length between latex beads and CCP could avoid stereoscopic obstacles and make ACPA closer to CCP. The CCP-immobilized latex bead based on layer by layer coupling (CCP-LB-LLC) was used for assembling the homemade kit, which was applied in fast measurements of ACPA through LTIA. The homemade kit possessed a low limit of detection (0.2 U/mL) and an acceptable the batch-to-batch reproducibility. In addition, the homemade kit can be stored at 4 °C for at least one month. When used to detect 20 clinical samples, the results of homemade kit were consistent with commercial ELISA. Furthermore, LTIA based on the homemade kit was simpler and cheaper than ELISA. These results demonstrated that the homemade kit could be useful for diagnosis of RA patients.