Suppr超能文献

一种针对低锚节点密度无线传感器网络的新型定位源优化算法。

A Novel Location Source Optimization Algorithm for Low Anchor Node Density Wireless Sensor Networks.

作者信息

Deng Zhongliang, Tang Shihao, Deng Xiwen, Yin Lu, Liu Jingrong

机构信息

School of Electronic Engineering, Beijing University of Posts and Telecommunications, Beijing 100876, China.

出版信息

Sensors (Basel). 2021 Mar 8;21(5):1890. doi: 10.3390/s21051890.

Abstract

Location information is one of the basic elements of the Internet of Things (IoT), which is also an important research direction in the application of wireless sensor networks (WSNs). Aiming at addressing the TOA positioning problem in the low anchor node density deployment environment, the traditional cooperative localization method will reduce the positioning accuracy due to excessive redundant information. In this regard, this paper proposes a location source optimization algorithm based on fuzzy comprehensive evaluation. First, each node calculates its own time-position distribute conditional posterior Cramer-Rao lower bound (DCPCRLB) and transfers it to neighbor nodes. Then collect the DCPCRLB, distance measurement, azimuth angle and other information from neighboring nodes to form a fuzzy evaluation factor set and determine the final preferred location source after fuzzy change. The simulation results show that the method proposed in this paper has better positioning accuracy about 33.9% with the compared method in low anchor node density scenarios when the computational complexity is comparable.

摘要

位置信息是物联网(IoT)的基本要素之一,也是无线传感器网络(WSN)应用中的一个重要研究方向。针对低锚节点密度部署环境下的到达时间(TOA)定位问题,传统的协作定位方法由于冗余信息过多会降低定位精度。对此,本文提出一种基于模糊综合评价的位置源优化算法。首先,每个节点计算自身的时间 - 位置分布条件后验克拉美 - 罗下界(DCPCRLB)并将其传输给相邻节点。然后收集来自相邻节点的DCPCRLB、距离测量值、方位角等信息,形成模糊评价因素集,并在模糊变换后确定最终的优选位置源。仿真结果表明,在计算复杂度相当的情况下,本文提出的方法在低锚节点密度场景中与对比方法相比具有约33.9%的更好定位精度。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验