Biochemical Process Engineering, Chemical Engineering, Department of Civil, Environmental and Natural Resources Engineering, Luleå University of Technology, 97187 Luleå, Sweden.
Biochemical Process Engineering, Chemical Engineering, Department of Civil, Environmental and Natural Resources Engineering, Luleå University of Technology, 97187 Luleå, Sweden.
Int J Biol Macromol. 2021 Jul 31;183:101-109. doi: 10.1016/j.ijbiomac.2021.04.136. Epub 2021 Apr 24.
Nanocellulose isolation from lignocellulose is a tedious and expensive process with high energy and harsh chemical requirements, primarily due to the recalcitrance of the substrate, which otherwise would have been cost-effective due to its abundance. Replacing the chemical steps with biocatalytic processes offers opportunities to solve this bottleneck to a certain extent due to the enzymes substrate specificity and mild reaction chemistry. In this work, we demonstrate the isolation of sulphate-free nanocellulose from organosolv pretreated birch biomass using different glycosyl-hydrolases, along with accessory oxidative enzymes including a lytic polysaccharide monooxygenase (LPMO). The suggested process produced colloidal nanocellulose suspensions (ζ-potential -19.4 mV) with particles of 7-20 nm diameter, high carboxylate content and improved thermostability (T = 301 °C, T = 337 °C). Nanocelluloses were subjected to post-modification using LPMOs of different regioselectivity. The sample from chemical route was the least favorable for LPMO to enhance the carboxylate content, while that from the C1-specific LPMO treatment showed the highest increase in carboxylate content.
从木质纤维素中分离纳米纤维素是一个繁琐且昂贵的过程,需要大量的能源和苛刻的化学物质,这主要是由于底物的顽固性,否则由于其丰富性,该过程将具有成本效益。用生物催化过程取代化学步骤在一定程度上提供了解决这一瓶颈的机会,这是由于酶对底物的特异性和温和的反应化学性质。在这项工作中,我们展示了使用不同的糖苷水解酶,以及包括溶菌多糖单加氧酶(LPMO)在内的辅助氧化酶,从有机溶剂预处理的桦木生物质中分离无硫酸盐纳米纤维素。所提出的工艺生产出胶体纳米纤维素悬浮液(ζ-电位-19.4 mV),粒径为 7-20nm,羧酸盐含量高,热稳定性提高(T=301°C,T=337°C)。纳米纤维素经过不同区域选择性的 LPMO 进行后修饰。化学途径的样品最不利于 LPMO 提高羧酸盐含量,而 C1 特异性 LPMO 处理的样品则显示出最高的羧酸盐含量增加。