Rigaud J L, Paternostre M T, Bluzat A
Département de Biologie, CEN Saclay, Gif-sur-Yvette, France.
Biochemistry. 1988 Apr 19;27(8):2677-88. doi: 10.1021/bi00408a007.
A method has been developed for identifying the step in a detergent-mediated reconstitution procedure at which an integral membrane protein can be associated with phospholipids to give functional proteoliposomes. Large liposomes prepared by reverse-phase evaporation were treated with various amounts of the detergents Triton X-100, octyl glucoside, or sodium cholate as described in the preceding paper [Paternostre, M.-T., Roux, M., & Rigaud, J. L. (1988) Biochemistry (preceding paper in this issue)]. At each step of the solubilization process, we added bacteriorhodopsin, the light-driven proton pump from Halobacterium halobium. The protein-phospholipid detergent mixtures were then subjected to SM2 Bio-Beads treatments to remove the detergent, and the resulting vesicles were analyzed with respect to protein insertion and orientation in the membrane by freeze-fracture electron microscopy, sucrose density gradients, and proton pumping measurements. The nature of the detergent used for reconstitution proved to be important for determining the mechanism of protein insertion. With sodium cholate, proteoliposomes were formed only from ternary phospholipid-protein-detergent micelles. With octyl glucoside, besides proteoliposome formation from ternary mixed micelles, direct incorporation of bacteriorhodopsin into preformed liposomes destabilized by saturating levels of this detergent was observed and gave proteoliposomes with optimal proton pumping activity. With Triton X-100, protein insertion into destabilized liposomes was also observed but involved a transfer of the protein initially present in phospholipid-Triton X-100-protein micelles into Triton X-100 saturated liposomes. Our results further demonstrated that protein orientation in the resulting proteoliposomes was critically dependent upon the mechanism by which the protein was incorporated.
已开发出一种方法,用于确定去污剂介导的重组过程中的步骤,在此步骤中,整合膜蛋白可与磷脂结合形成功能性蛋白脂质体。如前文所述[帕特诺斯特雷,M.-T.,鲁克斯,M.,& 里戈,J. L.(1988年)《生物化学》(本期前文)],通过反相蒸发制备的大脂质体用不同量的去污剂Triton X-100、辛基葡糖苷或胆酸钠处理。在溶解过程的每个步骤中,我们添加了细菌视紫红质,即来自嗜盐菌的光驱动质子泵。然后对蛋白质 - 磷脂去污剂混合物进行SM2 Bio-Beads处理以去除去污剂,并通过冷冻断裂电子显微镜、蔗糖密度梯度和质子泵测量分析所得囊泡中蛋白质在膜中的插入和取向。结果表明,用于重组的去污剂的性质对于确定蛋白质插入机制很重要。使用胆酸钠时,仅由三元磷脂 - 蛋白质 - 去污剂胶束形成蛋白脂质体。使用辛基葡糖苷时,除了由三元混合胶束形成蛋白脂质体外,还观察到细菌视紫红质直接掺入由该去污剂饱和水平使其不稳定的预先形成的脂质体中,并产生具有最佳质子泵活性的蛋白脂质体。使用Triton X-100时,也观察到蛋白质插入不稳定的脂质体中,但这涉及最初存在于磷脂 - Triton X-100 - 蛋白质胶束中的蛋白质转移到Triton X-100饱和的脂质体中。我们的结果进一步证明,所得蛋白脂质体中蛋白质的取向关键取决于蛋白质的掺入机制。