Lévy D, Bluzat A, Seigneuret M, Rigaud J L
Départment de Biologie, URA (CNRS), Gif-Sur-Yvette, France.
Biochim Biophys Acta. 1990 Jun 27;1025(2):179-90. doi: 10.1016/0005-2736(90)90096-7.
Equilibrium and kinetic aspects of Triton X-100 adsorption onto hydrophobic Bio-Beads SM2 were investigated in detail using the batch procedure originally described by Holloway, P.W. (1973) Anal. Biochem. 53, 304-308. The results demonstrated the importance of the initial detergent concentration, the amount of beads, the commercial source of the detergent, the temperature and the presence of phospholipids in determining the rates of Triton X-100 adsorption onto Bio-Beads. One of the main findings was that Bio-Beads allowed the almost complete removal of Triton X-100, whatever the initial experimental conditions. It was shown that monomeric as well as micellar detergent could be adsorbed and that a key factor in determining the rate of detergent removal was the availability of the free bead surface. Rates of detergent removal were found to be linearly related to the amount of beads even for bead concentrations above those sufficient to remove all the detergent initially present. Adsorptive capacity of phospholipids onto Bio-Beads SM2 was also analyzed and found to be much smaller (2 mg lipid per g of wet beads) than that of Triton X-100 (185 mg TX 100 per g of wet beads). A more general aspect of this work was that the use of Bio-Beads SM2 provided a convenient way for varying and controlling the time course of Triton X-100 removal. The method was further extended to the formation of liposomes from phospholipid-Triton X-100 micelles and the size of the liposomes was found to be critically dependent upon the rate of detergent removal. A general procedure was described to prepare homogeneous populations of vesicles. Freeze-fracture electron microscopy and permeability studies indicated that the liposomes thus obtained were unilamellar, relatively large and impermeable. Noteworthy, this new procedure was shown to be well suited for the reconstitution of different membrane transport proteins such as bacteriorhodopsin, Ca2(+)-ATPase and H(+)-ATPase.
采用最初由霍洛韦(P.W. Holloway,1973年,《分析生物化学》53卷,304 - 308页)描述的分批法,详细研究了Triton X - 100在疏水性生物珠SM2上的吸附平衡和动力学方面。结果表明,初始去污剂浓度、珠子用量、去污剂的商业来源、温度以及磷脂的存在对Triton X - 100在生物珠上的吸附速率具有重要影响。主要发现之一是,无论初始实验条件如何,生物珠都能几乎完全去除Triton X - 100。结果表明,单体和胶束形式的去污剂均可被吸附,且决定去污剂去除速率的一个关键因素是自由珠表面的可用性。发现即使珠子浓度高于足以去除所有初始存在的去污剂的浓度,去污剂去除速率仍与珠子用量呈线性关系。还分析了磷脂在生物珠SM2上的吸附能力,发现其比Triton X - 100的吸附能力小得多(每克湿珠子吸附2毫克脂质)(每克湿珠子吸附185毫克TX 100)。这项工作更普遍的一个方面是,使用生物珠SM2为改变和控制Triton X - 100的去除时间进程提供了一种便捷方法。该方法进一步扩展到由磷脂 - Triton X - 100胶束形成脂质体,发现脂质体的大小严重依赖于去污剂的去除速率。描述了一种制备均匀囊泡群体的通用程序。冷冻蚀刻电子显微镜和渗透性研究表明,由此获得的脂质体是单层的、相对较大且不透性的。值得注意的是,这种新程序被证明非常适合重组不同的膜转运蛋白,如细菌视紫红质、Ca2(+) - ATP酶和H(+) - ATP酶。