Xie Li, Liu Ruiheng, Zhu Chenxi, Bu Zhonglin, Qiu Wujie, Liu Jianjun, Xu Fangfang, Pei Yanzhong, Bai Shengqiang, Chen Lidong
State Key Laboratory of High Performance Ceramics and Superfine Microstructure, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai, 200050, China.
Center of Materials Science and Optoelectronics Engineering, University of Chinese Academy of Sciences, Beijing, 100049, China.
Small. 2021 Jun;17(25):e2100915. doi: 10.1002/smll.202100915. Epub 2021 May 25.
Manipulations of carrier and phonon scatterings through hierarchical structures have been proved to be effective in improving thermoelectric performance. Previous efforts in GeTe-based materials mainly focus on simultaneously optimizing the carrier concentration and band structure. In this work, a synergistic strategy to tailor thermal and electrical transport properties of GeTe by combination with the scattering effects from both Ge vacancies and other defects is reported. The addition of Fe in GeTe-based compounds introduces the secondary phase of FeGe , synchronously increasing the concentration of Ge vacancies and arousing more Ge planar defects. These hierarchical defects contribute to a large scattering factor, leading to a significant enhancement of Seebeck coefficient and further a splendid power factor. Meanwhile, benefiting from the reinforced phonon scatterings by multiscale hierarchical structures, an extremely low lattice thermal conductivity is successfully achieved. With simultaneously optimized electrical and thermal transport properties, a maximum figure of merit, zT, value of 2.1 at 750 K and an average zT value of 1.5 in 400-800 K are realized in Ge Sb Te/1.5%FeGe . This work demonstrates that manipulation of hierarchical defects is an effective strategy to optimize the thermoelectric properties.
通过分级结构对载流子和声子散射进行调控已被证明在提高热电性能方面是有效的。此前基于GeTe的材料所做的努力主要集中在同时优化载流子浓度和能带结构。在这项工作中,报道了一种协同策略,通过结合Ge空位和其他缺陷的散射效应来调整GeTe的热输运和电输运性质。在基于GeTe的化合物中添加Fe会引入FeGe第二相,同步增加Ge空位浓度并引发更多的Ge平面缺陷。这些分级缺陷导致较大的散射因子,使得塞贝克系数显著提高,进而功率因子出色。同时,受益于多尺度分级结构增强的声子散射,成功实现了极低的晶格热导率。通过同时优化电输运和热输运性质,在GeSbTe/1.5%FeGe中实现了750K时最大优值zT为2.1以及400 - 800K范围内平均zT值为1.5。这项工作表明,调控分级缺陷是优化热电性能的有效策略。