Department of Orthopaedic Surgery, Rhode Island Hospital, Warren Alpert Medical School of Brown University, Providence, RI, 02903, USA.
Weiss Center for Orthopaedic Trauma Research, Rhode Island Hospital, Providence, RI, USA.
Spine Deform. 2021 Nov;9(6):1493-1500. doi: 10.1007/s43390-021-00380-w. Epub 2021 Jun 25.
The opportunistic multi-drug resistant nosocomial gram negative bacilli Serratia marcescens (S. marcescens) is a rising contributor to spinal implant infections (Iguchi et al., Genome Biol Evol 6:2096-2110, 2014; Teresa et al., J Clin Microbiol 55:2334-2347; Dante et al., J Clin Microbiol 54:120-126). This study investigates the most effective matrix ratio of an antibiotic-independent, silver carboxylate-doped titanium dioxide (TiO)-polydimethylsiloxane (PDMS) coating in preventing adherence of multidrug resistant pathogen S. marcescens to spinal implant materials.
This project examined an antibiotic-independent, silver carboxylate-doped titanium dioxide (TiO)-polydimethylsiloxane (PDMS) coating on three common spinal implant materials, polyetheretherketone (PEEK), stainless steel (SS), and titanium (Ti), which previously were found to be prone to bacterial adhesion (Garcia et al., Spine Deform 8:351-359). After generation of dose response curves to find the optimal silver carboxylate concentration, 95% TiO-5% PDMS was combined with 10× silver carboxylate and compared to 100% silver carboxylate and uncoated implants. Implants were imaged using scanning electron microscopy and confocal laser scanning microscopy to detect adherent S. marcescens.
Ninety-five percent TiO-5% PDMS and 10× silver carboxylate coating decreased adherence of S. marcescens on PEEK by 99.61% (p = 0.001), on titanium by 98.77% (p = 0.001), and on stainless steel by 88.10% (p = 0.001) after 24 h. The average decrease in bacterial adherence was 95.49% compared to uncoated implants.
A coating composition comprised of 95% TiO-5% PDMS matrix and 10× silver carboxylate most effectively decreases adherence of S. marcescens on spinal implants. These results suggest that the application of a non-antibiotic, bactericidal coating prior to spinal surgery may prevent the adherence and proliferation of MDR S. marcescens and decrease the incidence of spinal SSI.
机会性多药耐药医院革兰氏阴性杆菌粘质沙雷氏菌(S. marcescens)是导致脊柱植入物感染的一个日益严重的因素(Iguchi 等人,《基因组生物进化》6:2096-2110,2014 年;Teresa 等人,《临床微生物学杂志》55:2334-2347 年;Dante 等人,《临床微生物学杂志》54:120-126 年)。本研究调查了一种抗生素非依赖性、银羧酸掺杂二氧化钛(TiO)-聚二甲基硅氧烷(PDMS)涂层,以防止多药耐药病原体粘质沙雷氏菌附着在脊柱植入物材料上的最佳基质比例。
本项目研究了一种抗生素非依赖性、银羧酸掺杂二氧化钛(TiO)-聚二甲基硅氧烷(PDMS)涂层在三种常见的脊柱植入物材料上的应用,即聚醚醚酮(PEEK)、不锈钢(SS)和钛(Ti),此前发现这些材料容易发生细菌粘附(Garcia 等人,《脊柱畸形》8:351-359)。在生成剂量反应曲线以找到最佳银羧酸浓度后,将 95%TiO-5%PDMS 与 10×银羧酸结合,并与 100%银羧酸和未涂层植入物进行比较。使用扫描电子显微镜和共焦激光扫描显微镜对植入物进行成像,以检测附着的粘质沙雷氏菌。
95%TiO-5%PDMS 和 10×银羧酸涂层使粘质沙雷氏菌在 PEEK 上的粘附减少了 99.61%(p=0.001),在钛上减少了 98.77%(p=0.001),在不锈钢上减少了 88.10%(p=0.001),在 24 小时后。与未涂层植入物相比,细菌粘附的平均减少率为 95.49%。
由 95%TiO-5%PDMS 基质和 10×银羧酸组成的涂层最有效地减少了粘质沙雷氏菌在脊柱植入物上的粘附。这些结果表明,在脊柱手术前应用非抗生素、杀菌涂层可能会防止多药耐药粘质沙雷氏菌的粘附和增殖,并降低脊柱 SSI 的发生率。