Lv Qian, Zhang Shaozhe
School of Physics and Information Technology, Shaanxi Normal University, West Chang'an Avenue, No. 620, Xi'an 710119, China.
Sensors (Basel). 2021 Jul 27;21(15):5073. doi: 10.3390/s21155073.
Interferometric inverse synthetic aperture radar (InISAR) has received significant attention in three-dimensional (3D) imaging due to its applications in target classification and recognition. The traditional two-dimensional (2D) ISAR image can be interpreted as a filtered projection of a 3D target's reflectivity function onto an image plane. Such a plane usually depends on unknown radar-target geometry and dynamics, which results in difficulty interpreting an ISAR image. Using the L-shape InISAR imaging system, this paper proposes a novel 3D target reconstruction algorithm based on Dechirp processing and 2D interferometric ISAR imaging, which can jointly estimate the effective rotation vector and the height of scattering center. In order to consider only the areas of the target with meaningful interferometric phase and mitigate the effects of noise and sidelobes, a special cross-channel coherence-based detector (C3D) is introduced. Compared to the multichannel CLEAN technique, advantages of the C3D include the following: (1) the computational cost is lower without complex iteration and (2) the proposed method, which can avoid propagating errors, is more suitable for a target with multi-scattering points. Moreover, misregistration and its influence on target reconstruction are quantitatively discussed. Theoretical analysis and numerical simulations confirm the suitability of the algorithm for 3D imaging of multi-scattering point targets with high efficiency and demonstrate the reliability and effectiveness of the proposed method in the presence of noise.
干涉逆合成孔径雷达(InISAR)因其在目标分类和识别中的应用而在三维(3D)成像中受到了广泛关注。传统的二维(2D)ISAR图像可以理解为三维目标反射率函数在图像平面上的滤波投影。这样的平面通常取决于未知的雷达-目标几何形状和动力学,这导致难以解释ISAR图像。本文利用L形InISAR成像系统,提出了一种基于去啁啾处理和二维干涉ISAR成像的三维目标重建算法,该算法可以联合估计有效旋转矢量和散射中心的高度。为了仅考虑具有有意义干涉相位的目标区域并减轻噪声和旁瓣的影响,引入了一种基于特殊跨通道相干性的检测器(C3D)。与多通道CLEAN技术相比,C3D的优点包括:(1)无需复杂迭代,计算成本更低;(2)所提出的方法可以避免误差传播,更适合具有多个散射点的目标。此外,还定量讨论了配准误差及其对目标重建的影响。理论分析和数值模拟证实了该算法对多散射点目标三维成像的适用性和高效性,并证明了所提方法在存在噪声情况下的可靠性和有效性。