Berizzi F, Mese E D, Diani M, Martorella M
Dipt. di Ingegneria dell'Informazione, Pisa Univ.
IEEE Trans Image Process. 2001;10(12):1880-90. doi: 10.1109/83.974573.
Very high resolution inverse synthetic aperture radar (ISAR) imaging of maneuvering targets is a complicated task. In fact, the conventional range Doppler (RD) ISAR technique does not work properly when target motions generate terms higher than the first order in the phase of the received signal relative to each scatterer. This effect typically happens when at least one of these situations occur: (1) very high resolution images are required; (2) the target maneuvers; and (3) the target undergoes significant angular motions (roll, pitch, and yaw). A novel ISAR technique, named range instantaneous Doppler (RID), has been proposed for the reconstruction of very high resolution images of maneuvering targets. In this paper, we analytically show that the RID technique works properly when high-resolution ISAR images are required of maneuvering and/or rolling, pitching, and yawing targets; we also quantify the performance improvement of the RID technique with respect to the RD technique. The problem is tackled from an analytical point of view. First, we define a new model of the ISAR received signal that is valid for maneuvering targets, then we derive and compare the analytical expression of the point spread function (PSF) for the two techniques. Furthermore, we perform a statistical analysis to evaluate the improvement of the RID technique versus the RD technique in terms of spatial resolution. Finally, we prove the effectiveness of the RID technique by simulating the imaging process for two different targets: (1) a ship that undergoes roll, pitch and yaw motions and (2) a fast maneuvering airplane.
对机动目标进行超高分辨率逆合成孔径雷达(ISAR)成像是一项复杂的任务。实际上,当目标运动在相对于每个散射体的接收信号相位中产生高于一阶的项时,传统的距离多普勒(RD)ISAR技术就无法正常工作。当至少出现以下情况之一时,通常会出现这种效应:(1)需要超高分辨率图像;(2)目标进行机动;(3)目标经历显著的角运动(横滚、俯仰和偏航)。已经提出了一种名为距离瞬时多普勒(RID)的新型ISAR技术,用于重建机动目标的超高分辨率图像。在本文中,我们通过分析表明,当需要对机动和/或横滚、俯仰和偏航目标进行高分辨率ISAR成像时,RID技术能够正常工作;我们还量化了RID技术相对于RD技术的性能提升。该问题从分析的角度进行解决。首先,我们定义了一个适用于机动目标的ISAR接收信号新模型,然后推导并比较了这两种技术的点扩散函数(PSF)的解析表达式。此外,我们进行了统计分析,以评估RID技术相对于RD技术在空间分辨率方面的提升。最后,我们通过模拟两种不同目标的成像过程来证明RID技术的有效性:(1)一艘进行横滚、俯仰和偏航运动的船舶;(2)一架快速机动的飞机。