Suppr超能文献

载氧化石墨烯接触镜的控释研究:体外与体内研究。

Controlled bimatoprost release from graphene oxide laden contact lenses: In vitro and in vivo studies.

机构信息

Maliba Pharmacy College, Uka Tarsadia University, Surat, 394350, India.

Maliba Pharmacy College, Uka Tarsadia University, Surat, 394350, India.

出版信息

Colloids Surf B Biointerfaces. 2021 Dec;208:112096. doi: 10.1016/j.colsurfb.2021.112096. Epub 2021 Sep 2.

Abstract

Ocular drug delivery using contact lenses may be able to substitute for eye drop therapy. However, issues with hydrophobic drugs (like bimatoprost that is used to treat glaucoma) such as low drug uptake using a simple soaking method into preformed contact lenses and alteration in the swelling and transmittance of lenses restricts the application for drug delivery. This research uses graphene oxide (GO) to control the release of bimatoprost from contact lenses along with improvements in the drug uptake, and lens swelling and transmittance. GO was loaded into silicone hydrogel contact lenses by adding the GO at the same time as lenses were polymerized. These lenses were soaked in bimatoprost. Alternatively contact lenses, either with or without GO, were produced by adding bimatoprost during lens polymerization. GO improved contact lens swelling due to its water binding capacity and lens transmittance due to the molecular dispersion of bimatoprost on the surface of the GO which prevented the local precipitation of the drug. The bimatoprost uptake was not improved in the presence of GO. However, its in vitro release profile was improved. Adding bimatoprost and GO at the same time as lenses were polymerized (DL-GO-BMT) significantly decreased the loss of drug during extraction and sterilization in comparison to contact lenses (DL-BMT) without GO. As the amount of GO was increased, the DL-GO-BMT lenses showed a significant decrease in the burst and cumulative release of bimatoprost. Ocular irritation and histopathology reports demonstrated the safety of GO contact lens. The in vivo pharmacokinetic studies in the rabbit tear fluid showed significant improvement in mean residence time (MRT) and area under the curve (AUC) with DL-GO-0.2 μg-BMT-100 contact lens in comparison to eye drop solution. The study demonstrated that the addition of GO to contact lenses can control the release of bimatoprost as well as improved the lens swelling and transmittance. However, further optimization is needed to modulate the release of drug within the therapeutic level to manage glaucoma.

摘要

利用接触镜进行眼部药物输送也许能够替代滴眼疗法。然而,对于疏水性药物(如用于治疗青光眼的比马前列素),存在一些问题,例如通过简单浸泡法将药物吸收到预制接触镜中的药物摄取率低,以及镜片的肿胀和透光率发生变化,这些限制了药物输送的应用。本研究使用氧化石墨烯(GO)来控制接触镜中比马前列素的释放,同时改善药物摄取、镜片肿胀和透光率。GO 通过在聚合镜片的同时添加 GO 被载入硅水凝胶接触镜中。这些镜片被浸泡在比马前列素中。或者,通过在镜片聚合过程中添加比马前列素来生产具有或不具有 GO 的接触镜。GO 改善了接触镜的肿胀,因为其具有结合水的能力,以及改善了镜片的透光率,因为比马前列素在 GO 表面的分子分散防止了药物的局部沉淀。在存在 GO 的情况下,比马前列素的摄取没有得到改善。然而,其体外释放曲线得到了改善。与不含 GO 的接触镜(DL-BMT)相比,在同时聚合镜片时添加比马前列素和 GO(DL-GO-BMT)显著减少了在提取和灭菌过程中的药物损失。随着 GO 用量的增加,DL-GO-BMT 镜片在比马前列素的突释和累积释放方面表现出显著降低。眼部刺激和组织病理学报告显示 GO 接触镜具有安全性。在兔子泪液中的体内药代动力学研究表明,与滴眼溶液相比,DL-GO-0.2μg-BMT-100 接触镜的平均驻留时间(MRT)和曲线下面积(AUC)显著提高。该研究表明,将 GO 添加到接触镜中可以控制比马前列素的释放,同时改善镜片的肿胀和透光率。然而,需要进一步优化以调节药物在治疗水平内的释放,以治疗青光眼。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验