Fraunhofer WKI, Department of Material Analysis and Indoor Chemistry, Bienroder Weg 54E, 38108 Braunschweig, Germany.
Environ Sci Process Impacts. 2021 Nov 17;23(11):1729-1746. doi: 10.1039/d1em00221j.
Acrolein (2-propenal) is a reactive substance undergoing multiple reaction pathways and an airborne pollutant with known corrosive, toxic and hazardous effects to the environment and to human health. So far, investigating the occurrence of acrolein in indoor air has been challenging due to analytical limitations. The classic DNPH-method has proven to be error-prone, even though it is still recommended in specific testing protocols. Thus, different approaches for an accurate determination of ambient acrolein have been introduced. In this work, an overview of already published data regarding emission sources and air concentrations is provided. In addition, a new method for the quantitative determination of acrolein in environmental test chambers and in indoor air is presented. Analysis is carried out using thermal desorption and coupled gas chromatography/mass spectrometry (TD-GC/MS) after sampling on the graphitized carbon black (GCB) Carbograph™ 5TD. All analytical steps have been carefully validated and compared with derivatization techniques (DNPH and DNSH) as well as online detection using PTR-QMS. The sampling time is short due to the low air collection volume of 4 L. Although derivatization is not applied, a detection limit of 0.1 μg m can be achieved. By increasing the sampling volume to 6 L, the limit of detection can be lowered to 0.08 μg m. No breakthrough during sampling or analyte loss during storage of the acrolein laden sampling tubes was found. Therefore, the presented method is robust, easy-to-handle and also very suitable for routine analyses and surveys.
丙烯醛(2-丙烯醛)是一种反应性物质,经历多种反应途径,是一种空气污染物,对环境和人类健康具有已知的腐蚀性、毒性和危害性。到目前为止,由于分析限制,调查室内空气中丙烯醛的存在一直具有挑战性。经典的 DNPH 方法已被证明容易出错,尽管它仍然在特定的测试协议中被推荐。因此,已经引入了不同的方法来准确测定环境丙烯醛。在这项工作中,提供了关于排放源和空气浓度的已发表数据的概述。此外,还提出了一种在环境测试室和室内空气中定量测定丙烯醛的新方法。分析是在采样后使用热解吸和气相色谱/质谱联用(TD-GC/MS)进行的,采样在石墨化碳黑(GCB)Carbograph™5TD 上进行。所有分析步骤都经过了仔细验证,并与衍生化技术(DNPH 和 DNSH)以及使用 PTR-QMS 的在线检测进行了比较。由于空气采集量低至 4 L,采样时间很短。尽管没有进行衍生化,但可以达到 0.1 μg m 的检测限。通过将采样体积增加到 6 L,可以将检测限降低到 0.08 μg m。在采样过程中没有发现穿透现象,也没有发现丙烯醛负载采样管在储存过程中分析物损失。因此,所提出的方法是稳健的、易于操作的,也非常适合常规分析和调查。