Bloomberg School of Public Health, Johns Hopkins University, Baltimore, Maryland 21205, United States.
Whiting School of Engineering, Johns Hopkins University, Baltimore, Maryland 21218, United States.
Chem Res Toxicol. 2021 Oct 18;34(10):2216-2226. doi: 10.1021/acs.chemrestox.1c00253. Epub 2021 Oct 5.
The surge in electronic cigarette (e-cig) use in recent years has raised questions on chemical exposures that may result from vaping. Previous studies have focused on measuring known toxicants, particularly those present in traditional cigarettes, while fewer have investigated unknown compounds and transformation products formed during the vaping process in these diverse and constantly evolving products. The primary aim of this work was to apply liquid chromatography-high-resolution mass spectrometry (LC-HRMS) and chemical fingerprinting techniques for the characterization of e-liquids and aerosols from a selection of popular e-cig products. We conducted nontarget and quantitative analyses of tobacco-flavored e-liquids and aerosols generated using four popular e-cig products: one disposable, two pod, and one tank/mod. Aerosols were collected using a condensation device and analyzed in solution alongside e-liquids by LC-HRMS. The number of compounds detected increased from e-liquids to aerosols in three of four commercial products, as did the proportion of condensed-hydrocarbon-like compounds, associated with combustion. Kendrick mass defect analysis suggested that some of the additional compounds detected in aerosols belonged to homologous series resulting from decomposition of high-molecular-weight compounds during vaping. Lipids in inhalable aerosols have been associated with severe respiratory effects, and lipid-like compounds were observed in aerosols as well as e-liquids analyzed. Six potentially hazardous additives and contaminants, including the industrial chemical tributylphosphine oxide and the stimulant caffeine, were identified and quantified in the e-cig liquids and aerosols analyzed. The obtained findings demonstrate the potential of nontarget LC-HRMS to identify previously unknown compounds and compound classes in e-cig liquids and aerosols, which is critical for the assessment of chemical exposures resulting from vaping.
近年来,电子烟(e-cig)的使用呈爆炸式增长,人们对可能由蒸气吸入引起的化学暴露问题提出了疑问。以前的研究主要集中在测量已知的有毒物质,特别是那些存在于传统香烟中的物质,而较少研究在这些多样化且不断发展的产品中蒸气过程中形成的未知化合物和转化产物。这项工作的主要目的是应用液相色谱-高分辨率质谱(LC-HRMS)和化学指纹图谱技术来对一系列流行的电子烟产品的电子烟液和气溶胶进行表征。我们对四种流行电子烟产品(一种一次性电子烟、两种 pod 电子烟和一种罐/模电子烟)使用的烟草味电子烟液和气溶胶进行了非靶向和定量分析。使用冷凝装置收集气溶胶,并与电子烟液一起通过 LC-HRMS 在溶液中进行分析。在四种商业产品中的三种产品中,从电子烟液到气溶胶检测到的化合物数量增加了,与燃烧有关的冷凝碳氢化合物样化合物的比例也增加了。肯德里克质量缺陷分析表明,在气溶胶中检测到的一些额外化合物属于同系物,它们是在蒸气过程中由高分子化合物分解产生的。可吸入气溶胶中的脂质与严重的呼吸道影响有关,并且在气溶胶和分析的电子烟液中都观察到了类脂化合物。在分析的电子烟液和气溶胶中发现并定量了六种潜在的危险添加剂和污染物,包括工业化学物质三丁基氧化磷和兴奋剂咖啡因。所获得的发现表明,非靶向 LC-HRMS 具有在电子烟液和气溶胶中识别以前未知的化合物和化合物类别的潜力,这对于评估蒸气引起的化学暴露至关重要。