Centers for Disease Control and Prevention, Tobacco and Volatiles Branch, 4770 Buford Hwy, M.S. S110-4, Atlanta, GA 30341, USA.
Battelle Analytical Services, 2987 Clairmont Road, Suite 450, Atlanta, GA 30329, USA.
J Anal Toxicol. 2021 Apr 12;45(4):337-347. doi: 10.1093/jat/bkaa088.
The popularity of electronic cigarettes (electronic nicotine delivery systems or ENDS) has grown rapidly over the past decade. With the continued evolution of ENDS, and the arrival of newer replaceable pod devices on the market, it is prudent to examine their emissions to help determine potential health risks to the user. Metal-containing particles were examined in aerosol from several pod-based devices from three manufacturers that offer flavored liquids in their respective products. Previous ENDS metal emissions studies focused on the total toxic metal concentrations in aerosols and have suggested that the principal sources are oxidized internal metal components that are in contact with the liquid. Most metal oxides have limited solubility, and it is likely that some metal content in ENDS aerosol may present as particles rather than dissolved forms. Examining the composition and number of particles in the ENDS aerosols is important because inhaled metal oxide particles cause pulmonary inflammation. Chronic inhalation of ENDS aerosol may lead to inflammatory cell activation in the lungs. Therefore, this study was designed to measure metal oxide particle concentrations and sizes in ENDS aerosols from select pod-based systems. Aerosol samples were generated with pod liquids (tobacco, mint or menthol) from devices produced by three manufacturers using CORESTA Recommended Method 81 parameters with a high-purity fluoropolymer aerosol trap. Particle sizes for chromium, iron, nickel, copper, zinc, tin and lead oxides were measured in triplicate using single particle inductively coupled plasma-mass spectrometry and dynamic light scattering. A novel aspect of these measurements included using dual element particle analysis to infer particle source component material. Particle concentrations in aerosols from the devices were variable between devices and from pod to pod, ranging from no detectable chromium- and zinc-containing particles in aerosol from some pods to 222,000 lead containing particles per 10 puffs from individual pods.
过去十年,电子烟(电子尼古丁输送系统或ENDS)的普及速度迅猛。随着ENDS 的不断发展以及新型可更换烟弹设备进入市场,对其排放物进行检测以帮助确定其对使用者潜在的健康风险是谨慎之举。本文检测了来自三家制造商的几种基于烟弹的设备的气溶胶中的含金属颗粒,这些制造商在各自的产品中提供调味液。此前的 ENDS 金属排放研究集中于气溶胶中的总毒性金属浓度,并表明主要来源是与液体接触的氧化内部金属组件。大多数金属氧化物的溶解度有限,因此,一些 ENDS 气溶胶中的金属含量可能以颗粒形式而不是溶解形式存在。检查 ENDS 气溶胶中的颗粒组成和数量很重要,因为吸入的金属氧化物颗粒会引起肺部炎症。慢性吸入 ENDS 气溶胶可能导致肺部炎症细胞激活。因此,本研究旨在测量选定基于烟弹的系统中 ENDS 气溶胶中的金属氧化物颗粒浓度和粒径。使用三种制造商生产的设备,按照 CORESTA 推荐方法 81 参数,用高纯度氟聚合物气溶胶收集器生成含烟弹液体(烟草、薄荷或薄荷醇)的气溶胶样品。使用单颗粒电感耦合等离子体质谱法和动态光散射法对铬、铁、镍、铜、锌、锡和铅氧化物的颗粒大小进行了三次重复测量。这些测量的一个新颖之处在于使用双元素颗粒分析来推断颗粒源组件材料。设备中气溶胶的颗粒浓度在设备之间和烟弹之间存在差异,一些烟弹的气溶胶中检测不到铬和锌颗粒,而某些烟弹中每吸 10 口就有 222000 个含铅颗粒。