Improvement of patient localization repeatability using a light-section based optical surface guidance system in a pre-positioning procedure.

PURPOSE

Surface-guided radiotherapy is useful for the pre-positioning and monitoring of radiotherapy. The purpose of this study was to investigate the impact of surface guidance on the repeatability of patient localization and to estimate the specific point at which high positional errors occur.

MATERIALS AND METHODS

Ten patients without the VOXELAN system (non-VXLN group) and 10 patients with the VOXELAN as the pre-positioning procedure (VXLN group) were included in this analysis. Twelve regions of interest (ROI) were defined in all the patients to verify any misalignment during radiotherapy. Thirteen ROIs were defined on the isocenter.

RESULTS

Compared with the non-VXLN group, the translational positional errors of the VXLN group were the same for all the ROIs. The mean translational positional errors of the VXLN group in the longitudinal direction were approximately 0.1mm, and the standard deviation was the largest among the three directions in all the ROIs. The magnitude of the standard deviation in the non-VXLN group varied independently of the ROI and direction. The standard deviations of the VXLN group in the longitudinal direction were large in all the ROIs, while the standard deviations in the vertical and lateral directions were small.

CONCLUSION

Pre-positioning with a surface guidance system reduced the body twist and rotation, which could not be corrected by image-guided radiotherapy alone. Since the VOXELAN can detect positioning errors quickly and without additional radiation exposure to the patient, it can be used as a tool for pre-positioning in radiotherapy.