Suppr超能文献

放射治疗中用于患者定位的光学表面扫描:1902次分次治疗的前瞻性分析

Optical Surface Scanning for Patient Positioning in Radiation Therapy: A Prospective Analysis of 1902 Fractions.

作者信息

Carl G, Reitz D, Schönecker S, Pazos M, Freislederer P, Reiner M, Alongi F, Niyazi M, Ganswindt U, Belka C, Corradini S

机构信息

1 Department of Radiation Oncology, University Hospital, LMU Munich, Munich, Germany.

Authors have contributed equally to this study.

出版信息

Technol Cancer Res Treat. 2018 Jan 1;17:1533033818806002. doi: 10.1177/1533033818806002.

Abstract

PURPOSE/OBJECTIVE: Reproducible patient positioning remains one of the major challenges in modern radiation therapy. Recently, optical surface scanners have been introduced into clinical practice in addition to well-established positioning systems, such as room laser and skin marks. The aim of this prospective study was to evaluate setup errors of the optical surface scanner Catalyst HD (C-RAD AB) in different anatomic regions.

MATERIAL/METHODS: Between October 2016 and June 2017 a total of 1902 treatment sessions in 110 patients were evaluated. The workflow of this study included conventional setup procedures using laser-based positioning with skin marks and an additional registration of the 3-dimensional (3D) deviations detected by the Catalyst system. The deviations of the surface-based method were then compared to the corrections of cone beam computed tomography alignment which was considered as gold standard. A practical Catalyst setup error was calculated between the translational deviations of the surface scanner and the laser positioning. Two one-sided t tests for equivalence were used for statistical analysis.

RESULTS

Data analysis revealed total deviations of 0.09 mm ± 2.03 mm for the lateral axis, 0.07 mm ± 3.21 mm for the longitudinal axis, and 0.44 mm ± 3.08 mm vertical axis for the Catalyst system, compared to -0.06 ± 3.54 mm lateral, 0.53 ± 3.47 mm longitudinal, and 0.19 ± 3.49 mm vertical for the laser positioning compared to cone beam computed tomography. The lowest positional deviations were found in the cranial region, and larger deviations occurred in the thoracic and abdominal sites. A statistical comparison using 2 one-sided t tests showed a general concordance of the 2 methods ( P ≤ 0.036), excluding the vertical direction of the abdominal region ( P = 0.198).

CONCLUSION

The optical surface scanner Catalyst HD is a reliable and feasible patient positioning system without any additional radiation exposure. From the head to the thoracic and abdominal region, a decrease in accuracy was observed within a comparable range for Catalyst and laser-assisted positioning.

摘要

目的/目标:可重复的患者定位仍然是现代放射治疗中的主要挑战之一。最近,除了成熟的定位系统(如室内激光和皮肤标记)外,光学表面扫描仪已被引入临床实践。这项前瞻性研究的目的是评估光学表面扫描仪Catalyst HD(C-RAD AB)在不同解剖区域的摆位误差。

材料/方法:2016年10月至2017年6月期间,对110例患者的1902次治疗疗程进行了评估。本研究的工作流程包括使用基于激光的定位和皮肤标记的传统摆位程序,以及对Catalyst系统检测到的三维(3D)偏差进行额外记录。然后将基于表面的方法的偏差与被视为金标准的锥形束计算机断层扫描对齐校正进行比较。计算表面扫描仪和平移偏差与激光定位之间的实际Catalyst摆位误差。使用两个单侧t检验进行等效性统计分析。

结果

数据分析显示,与锥形束计算机断层扫描相比,Catalyst系统横轴的总偏差为0.09 mm±2.03 mm,纵轴为0.07 mm±3.21 mm,垂直轴为0.44 mm±3.08 mm;激光定位的横轴为-0.06±3.54 mm,纵轴为0.53±3.47 mm,垂直轴为0.19±3.49 mm。在颅骨区域发现的位置偏差最小,而在胸部和腹部部位出现的偏差较大。使用两个单侧t检验的统计比较显示两种方法总体一致(P≤0.036),腹部区域的垂直方向除外(P = 0.198)。

结论

光学表面扫描仪Catalyst HD是一种可靠且可行的患者定位系统,无需额外的辐射暴露。从头部到胸部和腹部区域,在Catalyst和激光辅助定位的可比范围内观察到准确性有所下降。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/a320/6243634/86ecc20c74f8/10.1177_1533033818806002-fig1.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验