Liu Hui, Long Yuegang, Chen Yun, Wang Zhiguo, Zhang Chun, Hu Renzong, Zhang Xiong, Yu Peng
School of Chemistry and Material Science, Hunan Agricultural University, Changsha 410128, China.
Guangdong Provincial Key Laboratory of Advanced Energy Storage Materials, School of Materials Science and Engineering, South China University of Technology, Guangzhou 510640, China.
ACS Appl Mater Interfaces. 2021 Dec 8;13(48):57317-57325. doi: 10.1021/acsami.1c18150. Epub 2021 Nov 24.
Cycle stability improvement of a high-capacity Si anode is a challenge for its wide application in high-energy-density lithium-ion batteries. Active amorphous/nanosized Si embedded in an inactive matrix is a strategy to improve the cycle stability of Si anodes. Ternary SiTiB (5 ≤ ≤ ≤ 20) alloys are designed and prepared by ball milling using elemental Si, Ti, and B as starting materials. The formation sequence of inactive phases during mechanical alloying is predicted by an effective heat-of-formation model and verified by microstructural characterization. The local-fine distribution of free amorphous and nanocrystalline Si in the SiTiB is analyzed by confocal μRaman spectroscopy. When used as lithium-ion anodes, the capacity and voltage affected by Si and inactive compounds in the SiTiB are concerned to assess their high energy density. Furthermore, the impact of free active Si, the inactive phase, and amorphous Si on the cyclability of SiTiB is studied. The results show that the SiTiB material is a potential anode for high-energy-density Li-ion batteries and could be used to guide the design of multi-component Si-alloy anodes.
