Department of Chemical Engineering, McMaster University, Hamilton, Ontario L8S 4L7, Canada.
Department of Physics and Astronomy, McMaster University, Hamilton, Ontario L8S 4M1, Canada.
ACS Biomater Sci Eng. 2022 Jan 10;8(1):340-347. doi: 10.1021/acsbiomaterials.1c01112. Epub 2021 Dec 14.
Biological hydrogels play important physiological roles in the body. These hydrogels often contain ordered subdomains that provide mechanical toughness and other tissue-specific functionality. Filamentous bacteriophages are nanofilaments with a high aspect ratio that can self-assemble into liquid crystalline domains that could be designed to mimic ordered biological hydrogels and can thus find applications in biomedical engineering. We have previously reported hydrogels of pure cross-linked liquid crystalline filamentous phage formed at very high concentrations exhibiting a tightly packed microstructure and high stiffness. In this work, we report a method for inducing self-assembly of filamentous phage into liquid crystalline hydrogels at concentrations that are several orders of magnitude below that of lyotropic liquid crystal formation, thus creating structural order but a less densely packed microstructure. Hybrid hydrogels of M13 phage and bovine serum albumin (0.25 w/v%) were formed and shown to adsorb up to 16× their weight in water. Neither component gelled on its own at the low concentrations used, suggesting synergistic action between the two components in the formation of the hydrogel. The hybrid hydrogels exhibited repetitive self-healing under physiological conditions and at room temperature, autofluorescence in three channels, and antibacterial activity toward host cells. Furthermore, the hybrid hydrogels exhibited a more than 2× higher ability to pack water compared to BSA-only hydrogels and 2× lower compression modulus compared to tightly packed M13-only hydrogels, suggesting that our method could be used to create hydrogels with tunable mechanical properties and pore structure through the addition of globular proteins, while maintaining bioactivity and microscale structural order.
生物水凝胶在体内发挥着重要的生理作用。这些水凝胶通常含有有序的亚结构域,提供机械韧性和其他组织特异性功能。丝状噬菌体是具有高纵横比的纳米纤维,可自组装成液晶畴,可设计模仿有序生物水凝胶,从而在生物医学工程中得到应用。我们之前报道过在非常高的浓度下形成的纯交联液晶丝状噬菌体水凝胶,其具有紧密堆积的微观结构和高刚性。在这项工作中,我们报告了一种在比溶致液晶形成低几个数量级的浓度下诱导丝状噬菌体自组装成液晶水凝胶的方法,从而形成结构有序但堆积密度较小的微观结构。形成了 M13 噬菌体和牛血清白蛋白(0.25w/v%)的混合水凝胶,并表明其在水中可吸附高达其重量 16 倍的水。在低浓度下,两种成分都没有单独成胶,这表明两种成分在水凝胶形成中存在协同作用。混合水凝胶在生理条件下和室温下表现出重复的自修复能力,在三个通道中具有自发荧光,并对宿主细胞具有抗菌活性。此外,与仅含 BSA 的水凝胶相比,混合水凝胶具有 2 倍以上的保水能力,与紧密堆积的仅含 M13 的水凝胶相比,压缩模量降低了 2 倍,这表明我们的方法可用于通过添加球状蛋白来创建具有可调机械性能和孔结构的水凝胶,同时保持生物活性和微观结构有序。