Kelly Emily S, Worsley Peter R, Bowen Catherine J, Cherry Lindsey S, Keenan Bethany E, Edwards Christopher J, O'Brien Neil, King Leonard, Dickinson Alex S
School of Engineering, Faculty of Engineering and Physical Sciences, University of Southampton, Southampton, United Kingdom.
School of Health Sciences, Faculty of Environmental and Life Sciences, University of Southampton, Southampton, United Kingdom.
Front Bioeng Biotechnol. 2021 Dec 23;9:803725. doi: 10.3389/fbioe.2021.803725. eCollection 2021.
Foot orthoses are prescribed to reduce forefoot plantar pressures and pain in people with rheumatoid arthritis. Computational modelling can assess how the orthoses affect internal tissue stresses, but previous studies have focused on a single healthy individual. This study aimed to ascertain whether simplified forefoot models would produce differing biomechanical predictions at the orthotic interface between people with rheumatoid arthritis of varying severity, and in comparison to a healthy control. The forefoot models were developed from magnetic resonance data of 13 participants with rheumatoid arthritis and one healthy individual. Measurements of bony morphology and soft tissue thickness were taken to assess deformity. These were compared to model predictions (99th% shear strain and plantar pressure, max. pressure gradient, volume of soft tissue over 10% shear strain), alongside clinical data including body mass index and Leeds Foot Impact Scale-Impairment/Footwear score (LFIS-IF). The predicted pressure and shear strain for the healthy participant fell at the lower end of the rheumatoid models' range. Medial first metatarsal head curvature moderately correlated to all model predicted outcomes (0.529 < < 0.574, 0.040 < < 0.063). BMI strongly correlated to all model predictions except pressure gradients (0.600 < < 0.652, < 0.05). There were no apparent relationships between model predictions and instances of bursae, erosion and synovial hypertrophy or LFIS-IF score. The forefoot models produced differing biomechanical predictions between a healthy individual and participants with rheumatoid arthritis, and between individuals with rheumatoid arthritis. Models capable of predicting subject specific biomechanical orthotic interactions could be used in the future to inform more personalised devices to protect skin and soft tissue health. While the model results did not clearly correlate with all clinical measures, there was a wide range in model predictions and morphological measures across the participants. Thus, the need for assessment of foot orthoses across a population, rather than for one individual, is clear.
足矫形器被用于减轻类风湿性关节炎患者的前足足底压力和疼痛。计算模型可以评估矫形器如何影响内部组织应力,但以往的研究主要集中在单一健康个体上。本研究旨在确定简化的前足模型在不同严重程度的类风湿性关节炎患者与健康对照之间的矫形器界面处是否会产生不同的生物力学预测结果。前足模型是根据13名类风湿性关节炎患者和1名健康个体的磁共振数据开发的。测量骨形态和软组织厚度以评估畸形情况。将这些测量结果与模型预测值(第99百分位剪切应变和足底压力、最大压力梯度、超过10%剪切应变的软组织体积)以及包括体重指数和利兹足部影响量表-损伤/鞋类评分(LFIS-IF)在内的临床数据进行比较。健康参与者的预测压力和剪切应变落在类风湿模型范围的下限。第一跖骨头内侧曲率与所有模型预测结果中度相关(0.529 < < 0.574,0.040 < < 0.063)。体重指数与除压力梯度外的所有模型预测均高度相关(0.600 < < 0.652, < 0.05)。模型预测与滑囊、侵蚀、滑膜增生情况或LFIS-IF评分之间没有明显关系。前足模型在健康个体与类风湿性关节炎患者之间以及类风湿性关节炎患者个体之间产生了不同的生物力学预测结果。能够预测个体特异性生物力学矫形器相互作用的模型未来可用于设计更个性化的装置,以保护皮肤和软组织健康。虽然模型结果与所有临床测量指标没有明显相关性,但参与者的模型预测和形态测量结果存在很大差异。因此,显然需要对人群而非个体进行足矫形器评估。