Lung Chi-Wen, Yang Tim D, Liau Ben-Yi, Cheung Waifong Catherine, Jain Sanjiv, Jan Yih-Kuen
Rehabilitation Engineering Lab, Department of Kinesiology and Community Health, University of Illinois at Urbana-Champaign , Champaign, Illinois, USA.
Department of Creative Product Design, Asia University , Taichung, Taiwan.
Assist Technol. 2020 Sep 2;32(5):277-286. doi: 10.1080/10400435.2018.1546781. Epub 2019 Jan 15.
Pressure ulcer interventions are commonly assessed with measures of seating interface pressure, such as peak pressure gradients (PPGs). Decreases in PPG magnitudes may reduce pressure ulcer risk by decreasing tissue deformation and increasing tissue perfusion of at-risk weight-bearing tissues. Changes in PPG directions, which have previously been overlooked in the seating pressure literature, may provide a transient increase in blood flow to at-risk tissues, even if the PPG magnitude and location remain the same. The purpose of this study was to assess both PPG components in response to combinations of wheelchair tilt and recline angles. Thirteen power wheelchair users were recruited into the study. Six combinations of wheelchair tilt (15°, 25°, and 35°) and recline (10° and 30°) were tested in random order. Each combination was tested with 5-min upright sitting, 5-min tilt and recline, and 5-min maximal pressure relief recovery. Changes in PPG magnitudes and PPG directions under the left ischial tuberosity were computed for the six angle combinations. The findings in this study suggested that when combining wheelchair tilt and recline, the recline function may be particularly useful in reducing PPG magnitudes, while the tilt function may be particularly useful in manipulating PPG directions.
压力性溃疡干预措施通常通过座位界面压力测量来评估,例如峰值压力梯度(PPG)。PPG幅度的降低可能通过减少组织变形和增加高危承重组织的组织灌注来降低压力性溃疡风险。PPG方向的变化在座位压力文献中此前一直被忽视,即使PPG幅度和位置保持不变,它也可能使高危组织的血流短暂增加。本研究的目的是评估PPG的两个组成部分对轮椅倾斜和后倾角度组合的反应。13名电动轮椅使用者被招募到该研究中。以随机顺序测试了轮椅倾斜(15°、25°和35°)和后倾(10°和30°)的六种组合。每种组合都进行了5分钟直立坐姿、5分钟倾斜和后倾以及5分钟最大减压恢复测试。计算了六种角度组合下左坐骨结节处PPG幅度和PPG方向的变化。本研究结果表明,当结合轮椅倾斜和后倾时,后倾功能在降低PPG幅度方面可能特别有用,而倾斜功能在操纵PPG方向方面可能特别有用。