Effect of a Support on the Properties of Zinc Oxide Based Sorbents.

We present the comparative analysis of three Zn-based sorbents for the process of sulphur removal from hot coal gas. The sorbents were prepared by a slurry impregnation of TiO, SiO and AlO, resulting in complex, multiphase materials, with the dominant phases of ZnTiO, ZnSiO and ZnAlO, respectively. We have analyzed the effect of supports on the phase composition, texture, reducibility and HS sorption. We have found that the phase composition significantly influences the susceptibility of the investigated materials to reduction by hydrogen. ZnTiO have been found to be the easiest to reduce which correlates with its ability to adsorb the largest amount of hydrogen sulphide-up to 4.2 gS/100 g-compared to the other sorbents, which absorb up to 2.2 gS/100 g. In the case of ZnSiO and ZnAlO, this effect also correlates with reducibility-these sorbents have been found to be highly resistant to reduction by hydrogen and to absorb much less hydrogen sulphide. In addition, the capacity of ZnAlO for HS adsorption decreases in the subsequent work cycles-from 2.2 gS/100 g in the first cycle to 0.8 gS/100 g in the third one. Computational analysis on the DFT level has shown that these materials show different thermodynamic stability of sulphur sites within the unit cells of the sorbents. For ZnTiO and ZnSiO, the adsorption is favorable in both the first and second layers of the former and only the top layer of the latter, while for zinc aluminate it is not favorable, which is consistent with the experimental findings.