Munir Hafiz Muhammad Shahzad, Feroze Nadeem, Ramzan Naveed, Sagir Muhammad, Babar Muhammad, Tahir Muhammad Suleman, Shamshad Jaweria, Mubashir Muhammad, Khoo Kuan Shiong
Department of Chemical Engineering, Khwaja Fareed University of Engineering and Information Technology (KFUEIT), Abu Dhabi Rd, Rahim Yar Khan, 64200, Pakistan; Chemical Engineering Department, University of Engineering and Technology, Lahore, 54890, Pakistan.
Chemical Engineering Department, University of Engineering and Technology, Lahore, 54890, Pakistan.
Chemosphere. 2022 Jun;297:134031. doi: 10.1016/j.chemosphere.2022.134031. Epub 2022 Feb 18.
The pulp and paper industry consumes enormous quality of freshwater, leading to wastewater. It must be treated to remove pollutants, particularly residual dyestuffs, before releasing them to water bodies to avoid adverse environmental effects. The traditional wastewater treatment methods used for the pulp and paper industry are less efficient in colour and chemical oxygen demand (COD) removal. The current study is aimed at developing a novel catalyst for the catalytic ozonation of pulp and paper wastewater with better colour and COD removal for sustainable resources of clean water. The proposed catalyst is impregnated by iron on natural zeolites. Various parameters such as catalyst dose, pH, ozone dose, initial COD concentration, and reaction time are studied and optimized. The performance was evaluated by comparing the results with the single ozonation process (SOP) and catalytic ozonation process (COP). The highest COD and colour reduction efficiencies have been achieved, i.e., 71%, and 88% at a natural pH of 6.8. The proposed process achieved higher COD and colour efficiencies than the single ozonation process and catalytic ozonation process using raw zeolites. The improvement in efficiencies are 23% and 29% for SOP and 17% and 19% for COP, respectively. Hence, the results proposed the sustainability and applicability of COP to treat paper and pulp sector effluent.
制浆造纸工业消耗大量淡水,从而产生废水。在将废水排放到水体之前,必须对其进行处理以去除污染物,特别是残留染料,以避免对环境产生不利影响。制浆造纸工业使用的传统废水处理方法在去除颜色和化学需氧量(COD)方面效率较低。当前的研究旨在开发一种新型催化剂,用于制浆造纸废水的催化臭氧化,以更好地去除颜色和COD,从而实现清洁水的可持续资源利用。所提出的催化剂是铁负载在天然沸石上。研究并优化了各种参数,如催化剂用量、pH值、臭氧用量、初始COD浓度和反应时间。通过将结果与单臭氧化工艺(SOP)和催化臭氧化工艺(COP)进行比较来评估性能。在天然pH值为6.8时,实现了最高的COD和颜色去除效率,即分别为71%和88%。所提出的工艺比使用天然沸石的单臭氧化工艺和催化臭氧化工艺具有更高的COD和颜色去除效率。对于SOP,效率提高分别为23%和29%,对于COP,效率提高分别为17%和19%。因此,结果表明催化臭氧化工艺处理制浆造纸行业废水具有可持续性和适用性。