Stocchi Matteo, Cao Zhibo, Joseph Christopher Hardly, Voss Thomas, Mencarelli Davide, Pierantoni Luca, Kaynak Canan Baristiran, Hebeler Joachim, Zwick Thomas, Wietstruck Matthias, Kaynak Mehmet
IHP Microelectronics, Im Technologiepark 25, 15236, Frankfurt (Oder), Germany.
Universitá Politecnica delle Marche, 60131, Ancona, Italy.
Sci Rep. 2022 Mar 10;12(1):3946. doi: 10.1038/s41598-022-07902-0.
A MM-loaded sub-THz on-chip antenna with a narrow beamwidth, 9 dB gain and a simulated peak efficiency of 76% at the center frequency of 300 GHz is presented. By surrounding the antenna with a single MM-cell ring defined solely on the top metal of the back-end of line, an efficient suppression of the surface waves is obtained. The on-chip antenna has been designed using IHPs 130 nm SiGe BiCMOS technology with a 7-layer metallization stack, combined with the local backside etching process aimed to creating an air cavity which is then terminated by a reflective plane. By comparing the measured MM-loaded antenna performances to its non-MM-loaded counterpart, an enhanced integrity of the main lobe due to the MM-cells shielding effect can be observed. An excellent agreement between the simulated and measured performances has been found, which makes the MM-loaded antennas a valid alternative for the upcoming next-generation sub-THz transceivers.
本文介绍了一种加载介质超材料(MM)的片上太赫兹天线,其在300GHz中心频率下具有窄波束宽度、9dB增益和76%的模拟峰值效率。通过在线路后端的顶部金属上仅定义一个MM单元环来围绕天线,可有效抑制表面波。该片上天线采用IHP的130nm SiGe BiCMOS技术设计,具有7层金属化堆叠,并结合局部背面蚀刻工艺以创建一个空气腔,然后由一个反射平面终止。通过将测量的加载MM天线性能与其未加载MM的对应天线进行比较,可以观察到由于MM单元的屏蔽效应,主瓣的完整性得到了增强。模拟和测量性能之间具有良好的一致性,这使得加载MM的天线成为下一代太赫兹收发器的有效替代方案。