Ribeiro Ana Isabel, Shvalya Vasyl, Cvelbar Uroš, Silva Renata, Marques-Oliveira Rita, Remião Fernando, Felgueiras Helena P, Padrão Jorge, Zille Andrea
Centre for Textile Science and Technology (2C2T), Department of Textile Engineering, University of Minho, Campus of Azurém, 4800-058 Guimaraes, Portugal.
Department of Gaseous Electronics (F6), Jožef Stefan Institute, SI-1000 Ljubljana, Slovenia.
Polymers (Basel). 2022 Mar 12;14(6):1138. doi: 10.3390/polym14061138.
Antimicrobial textiles are helpful tools to fight against multidrug-resistant pathogens and nosocomial infections. The deposition of silver nanoparticles (AgNPs) onto textiles has been studied to achieve antimicrobial properties. Yet, due to health and environmental safety concerns associated with such formulations, processing optimizations have been introduced: biocompatible materials, environmentally friendly agents, and delivery platforms that ensure a controlled release. In particular, the functionalization of polyester (PES) fabric with antimicrobial agents is a formulation in high demand in medical textiles. However, the lack of functional groups on PES fabric hinders the development of cost-effective, durable systems that allow a controlled release of antimicrobial agents. In this work, PES fabric was functionalized with AgNPs using one or two biocompatible layers of chitosan or hexamethyldisiloxane (HMDSO). The addition of organo-matrices stabilized the AgNPs onto the fabrics, protected AgNPs from further oxidation, and controlled their release. In addition, the layered samples were efficient against Staphylococcus aureus and Escherichia coli. The sample with two layers of chitosan showed the highest efficacy against S. aureus (log reduction of 2.15 ± 1.08 after 3 h of contact). Against E. coli, the sample with two layers of chitosan showed the best properties. Chitosan allowed to control the antimicrobial activity of AgNPs, avoid the complete loss of AgNPs after washings and act in synergy with AgNPs. After 3 h of incubation, this sample presented a log reduction of 4.81, and 7.27 of log reduction after 5 h of incubation. The antimicrobial results after washing showed a log reduction of 3.47 and 4.88 after 3 h and 5 h of contact, respectively. Furthermore, the sample with a final layer of HMDSO also presented a controlled antimicrobial effect. The antimicrobial effect was slower than the sample with just an initial layer of HMDSO, with a log reduction of 4.40 after 3 h of incubation (instead of 7.22) and 7.27 after 5 h. The biocompatibility of the composites was confirmed through the evaluation of their cytotoxicity towards HaCaT cells (cells viability > 96% in all samples). Therefore, the produced nanocomposites could have interesting applications in medical textiles once they present controlled antimicrobial properties, high biocompatibility and avoid the complete release of AgNPs to the environment.
抗菌纺织品是对抗多重耐药病原体和医院感染的有用工具。人们研究了将银纳米颗粒(AgNPs)沉积到纺织品上以实现抗菌性能。然而,由于与此类制剂相关的健康和环境安全问题,已引入了加工优化措施:生物相容性材料、环境友好型试剂以及确保控释的递送平台。特别是,用抗菌剂对聚酯(PES)织物进行功能化是医用纺织品中需求量很大的一种制剂。然而,PES织物上缺乏官能团阻碍了开发具有成本效益、耐用且能实现抗菌剂控释的系统。在这项工作中,使用一层或两层生物相容性壳聚糖或六甲基二硅氧烷(HMDSO)对PES织物进行AgNPs功能化。有机基质的添加使AgNPs稳定在织物上,保护AgNPs免受进一步氧化,并控制其释放。此外,分层样品对金黄色葡萄球菌和大肠杆菌有效。两层壳聚糖的样品对金黄色葡萄球菌显示出最高的功效(接触3小时后对数减少2.15±1.08)。对于大肠杆菌,两层壳聚糖的样品表现出最佳性能。壳聚糖能够控制AgNPs的抗菌活性,避免洗涤后AgNPs完全流失,并与AgNPs协同作用。孵育3小时后,该样品的对数减少为4.81,孵育5小时后对数减少为7.27。洗涤后的抗菌结果显示,接触3小时和5小时后对数减少分别为3.47和4.88。此外,最后一层为HMDSO的样品也呈现出可控的抗菌效果。其抗菌效果比仅初始层为HMDSO的样品慢,孵育3小时后对数减少为4.40(而不是7.22),孵育5小时后为7.27。通过评估复合材料对HaCaT细胞的细胞毒性证实了其生物相容性(所有样品中的细胞活力>96%)。因此,所制备的纳米复合材料一旦具有可控的抗菌性能、高生物相容性并避免AgNPs完全释放到环境中,就可能在医用纺织品中有有趣的应用。