Hursa Šajatović Anica, Flinčec Grgac Sandra, Zavec Daniela
Faculty of Textile Technology, University of Zagreb, 10 000 Zagreb, Croatia.
TITERA Innovative Technologies, 2212 Šentilj, Slovenia.
Materials (Basel). 2022 Mar 24;15(7):2384. doi: 10.3390/ma15072384.
The main characteristic of clothing for protection against heat and flame is the protection of users from external influences and danger in the conditions of elevated temperatures and exposure to flame, fire, smoke, and water. The paper presents research on the clothing system for protection against heat and flame using a fire manikin and systematically analyses the damage caused after testing. As part of the damage analysis, the existence of microdamage and impurities on the clothing system was determined using a USB Dino-Lite microscope. In addition, the intensities and composition of gaseous decomposition products during the thermogravimetric analysis of samples were investigated. The results of the research using a fire manikin showed that the user of the examined clothing system would not have sustained injuries dangerous to health and life, which confirmed the protective properties. The results of the TG-FTIR indicate that the decomposition of the fabric sample of the modacrylic-cotton fiber mixture takes place in three stages, and the identified gaseous degradation products were HO, CO, and CO.
隔热防火服装的主要特性是在高温以及暴露于火焰、火灾、烟雾和水的条件下保护使用者免受外部影响和危险。本文介绍了使用消防人体模型对隔热防火服装系统进行的研究,并系统地分析了测试后造成的损坏。作为损坏分析的一部分,使用USB Dino-Lite显微镜确定了服装系统上微损伤和杂质的存在。此外,还研究了样品热重分析过程中气态分解产物的强度和成分。使用消防人体模型的研究结果表明,所检查的服装系统的使用者不会受到危及健康和生命的伤害,这证实了其防护性能。热重-傅里叶变换红外光谱(TG-FTIR)的结果表明,腈氯纶-棉纤维混合物的织物样品分解分三个阶段进行,鉴定出的气态降解产物为HO、CO和CO。