Pal Anusuya, Gope Amalesh, Athair Ari S, Iannacchione Germano S
Department of Physics, Order-Disorder Phenomena Laboratory, Worcester Polytechnic Institute Worcester MA 01609 USA
Department of English, Tezpur University Tezpur Assam 784028 India.
RSC Adv. 2020 Apr 30;10(29):16906-16916. doi: 10.1039/d0ra01748e. eCollection 2020 Apr 29.
Pattern formation in drying protein droplets continues to attract considerable research attention because it can be linked to specific protein-protein interactions. An extensive study of the drying evolution and the final crack patterns is presented, highlighting the concentration dependence (from 1 to 13 wt%) of two globular proteins, lysozyme (Lys) and bovine serum albumin (BSA), in de-ionized water. The drying evolution starts with a constant contact radius mode and shifts to a mixed mode where both fluid front and contact angle changes. The contact angle monotonically decreases, whereas, the fluid front exhibits two regimes: an initial linear regime and a later non-linear regime. Unlike the linear regime, the non-linear regime is faster for Lys droplets. This results in the formation of a "mound"-like structure in the central region. A new feature, a "dimple" is observed in this mound which is found to be dependent on the initial concentration. The different crack morphology of BSA and Lys depends strongly on the initial state of the solution and can be interpreted using a simple mechanical model. In fact, when dried under uniform conditions (surface, humidity, temperature, droplet diameter, ), the evolution and the final pattern displays as a fingerprint of the initial state.
干燥蛋白质液滴中的图案形成一直吸引着大量研究关注,因为它可能与特定的蛋白质 - 蛋白质相互作用相关。本文对干燥过程的演变以及最终的裂纹图案进行了广泛研究,重点关注了两种球状蛋白质(溶菌酶(Lys)和牛血清白蛋白(BSA))在去离子水中浓度(从1 wt%到13 wt%)的依赖性。干燥过程始于恒定接触半径模式,然后转变为流体前沿和接触角都发生变化的混合模式。接触角单调减小,而流体前沿呈现出两种状态:初始的线性状态和随后的非线性状态。与线性状态不同,Lys液滴的非线性状态更快。这导致在中心区域形成“丘状”结构。在这个丘状物中观察到一个新特征——“凹坑”,发现它取决于初始浓度。BSA和Lys不同的裂纹形态强烈依赖于溶液的初始状态,并且可以用一个简单的力学模型来解释。实际上,在均匀条件(表面、湿度、温度、液滴直径)下干燥时,演变过程和最终图案表现为初始状态的指纹。