Suppr超能文献

简便的一锅法合成镁掺杂的石墨相氮化碳用于光催化还原一氧化碳。

Facile one-pot synthesis of Mg-doped g-CN for photocatalytic reduction of CO.

作者信息

Dong Xinyue, Zhang Suicai, Wu Hualin, Kang Zhuo, Wang Li

机构信息

School of Energy and Environmental Engineering, University of Science and Technology Beijing Beijing 100083 China

State Key Laboratory for Advanced Metals and Materials, School of Materials Science and Engineering, University of Science and Technology Beijing Beijing 100083 P. R. China.

出版信息

RSC Adv. 2019 Sep 13;9(49):28894-28901. doi: 10.1039/c9ra04606b. eCollection 2019 Sep 9.

Abstract

Graphitic carbon nitride (g-CN) has attracted wide attention due to its potential in solving energy and environmental issues. However, rapid charge recombination and a narrow visible light absorption region limit its performance. In our study, Mg-doped g-CN was synthesized through a facile one-pot strategy for CO reduction. After Mg doping, the light utilization efficiency and photo-induced electron-hole pair separation efficiency of the catalysts were improved, which could be due to the narrower band gap and introduced midgap states. The highest amounts of CO and CH were obtained on Mg-CN-4% under ultraviolet light illumination, which were about 5.1 and 3.8 times that of pristine g-CN, respectively; the yield of CO and CH reached 12.97 and 7.62 μmol g under visible light irradiation. Our work may provide new insight for designing advanced photocatalysts in energy conversion applications.

摘要

石墨相氮化碳(g-CN)因其在解决能源和环境问题方面的潜力而受到广泛关注。然而,快速的电荷复合和狭窄的可见光吸收区域限制了其性能。在我们的研究中,通过一种简便的一锅法策略合成了镁掺杂的g-CN用于CO还原。镁掺杂后,催化剂的光利用效率和光生电子-空穴对分离效率得到提高,这可能归因于较窄的带隙和引入的中间能隙态。在紫外光照射下,Mg-CN-4%上获得的CO和CH量最高,分别约为原始g-CN的5.1倍和3.8倍;在可见光照射下,CO和CH的产率分别达到12.97和7.62 μmol g。我们的工作可能为设计用于能量转换应用的先进光催化剂提供新的见解。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/be01/9071204/6ecf0b921d5a/c9ra04606b-f1.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验