Selevou Aristoula, Papamokos George, Yildirim Tolga, Duran Hatice, Steinhart Martin, Floudas George
Department of Physics, University of Ioannina P. O. Box 1186 451 10 Ioannina Greece
Department of Materials Science & Nanotechnology Engineering, TOBB University of Economics and Technology Söğütözü Cad. 43 Ankara 06560 Turkey.
RSC Adv. 2019 Nov 20;9(65):37846-37857. doi: 10.1039/c9ra08806g. eCollection 2019 Nov 19.
The eutectic mixture of liquid crystals E7 is studied in confinement by means of thermal and dielectric measurements. The uniform 1-D confinement provided by self-ordered nanoporous alumina leads to a decrease in the nematic to isotropic transition temperature due to interaction with the pore surface, surface anchoring. The prevalence of certain dynamic modes of relaxation is found to depend on the surface properties of the confining pores. The dynamics (, relaxation times) were found to accelerate with increasing confinement, resulting in a decreasing glass temperature, independent of surface treatment. From the pre- and meta-transitional dependence of the dielectric permittivity on temperature we are able to deduce a weakening effect of confinement on the nematic to isotropic (N/I) transition which allows the determination of a critical pore diameter (in the range from 11 nm to 23 nm) below which the transition becomes continuous. Comparison of the N/I transition of E7 to those of its constituent liquid crystals reveals a significantly weaker transition occurring over a widened temperature range. This suggest the importance of concentration fluctuations in rounding first order phase transitions that are triggered by the different length scales and ranges of nematic stability in E7. The results have an impact beyond the present case and for several soft materials ( oligomers used as OLEDs, polymers, colloids) as it demonstrates the importance of concentration fluctuations in addition to thermal fluctuation on the strength of phase transitions.
通过热学和介电测量手段,对受限条件下的液晶E7共混物进行了研究。自组装纳米多孔氧化铝提供的均匀一维受限环境,由于与孔表面的相互作用即表面锚定作用,导致向列相到各向同性相的转变温度降低。研究发现,某些动态弛豫模式的普遍程度取决于受限孔的表面性质。动力学(弛豫时间)随受限程度增加而加快,导致玻璃化温度降低,且与表面处理无关。根据介电常数在温度上的预转变和亚转变依赖性,我们能够推断出受限对向列相到各向同性相(N/I)转变的弱化作用,从而确定临界孔径(范围为11纳米至23纳米),低于该孔径时转变变为连续。将E7的N/I转变与其组成液晶的转变进行比较,发现在更宽的温度范围内发生的转变明显较弱。这表明浓度涨落在使由E7中向列相稳定性的不同长度尺度和范围引发的一级相变变圆过程中具有重要作用。这些结果的影响超出了当前的研究范围,对几种软材料(用作有机发光二极管的低聚物、聚合物、胶体)也有影响,因为它证明了除热涨落外,浓度涨落在相变强度方面的重要性。