Kaczmarek Agata, Hoffman Jacek
Institute of Fundamental Technological Research, Polish Academy of Sciences, Pawinskiego 5B, 02-106 Warsaw, Poland.
Nanotechnology. 2022 Jun 9;33(35). doi: 10.1088/1361-6528/ac71b4.
Despite the existence of many more efficient methods of producing carbon nanoparticles, ablation of a carbon target by a laser pulse remains important. It enables studying the bare properties of nanoparticles, not contaminated with reagents or reaction products. The present work analyses the mechanisms of nucleation and growth of nanoparticles in carbon vapours generated during ablation of graphite with a nanosecond laser pulse. The role of both the homogeneous and the heterogeneous (ions) nucleation was investigated, defining the areas of their occurrence. It has been shown that the most favourable conditions are high pressure of the order 1 GPa and relatively low temperature of about 15 000 K. Such conditions are obtainable when ablation occurs in a liquid and the fluence of the laser pulse is low, exceeding the ablation threshold about 2.7 times only. The resulting nanoparticles are relatively homogeneous and have a diameter of approximately 2.5-5 nm.
尽管存在许多更高效的制备碳纳米颗粒的方法,但用激光脉冲烧蚀碳靶仍然很重要。它能够研究纳米颗粒的固有特性,而不被试剂或反应产物污染。目前的工作分析了用纳秒激光脉冲烧蚀石墨过程中产生的碳蒸气中纳米颗粒的成核和生长机制。研究了均相成核和异质(离子)成核的作用,确定了它们发生的区域。结果表明,最有利的条件是约1 GPa的高压和约15000 K的相对低温。当在液体中发生烧蚀且激光脉冲的能量密度较低,仅超过烧蚀阈值约2.7倍时,可获得这样的条件。由此产生的纳米颗粒相对均匀,直径约为2.5 - 5 nm。