Chakravarti Aatreya, Marangalou Amin Hazrati, Costanzo Ian Matthew, Sen Devdip, Sciulli Mirco, Tsuno Yusuke, Guler Ulkuhan
Department of Electrical and Computer Engineering, Worcester Polytechnic Institute, Worcester, MA 01609, USA.
Department of Integrative Neurophysiology, Graduate School of Medical Sciences, Kanazawa University, Kanazawa 920-8640, Japan.
Micromachines (Basel). 2022 Apr 30;13(5):727. doi: 10.3390/mi13050727.
Visualizing neuronal activation and neurotransmitter release by using fluorescent sensors is increasingly popular. The main drawback of contemporary multi-color or multi-region fiber photometry systems is the tethered structure that prevents the free movement of the animals. Although wireless photometry devices exist, a review of literature has shown that these devices can only optically stimulate or excite with a single wavelength simultaneously, and the lifetime of the battery is short. To tackle this limitation, we present a prototype for implementing a fully wireless photometry system with multi-color and multi-region functions. This paper introduces an integrated circuit (IC) prototype fabricated in TSMC 180 nm CMOS process technology. The prototype includes 3-channel optical excitation, 2-channel optical recording, wireless power transfer, and wireless data telemetry blocks. The recording front end has an average gain of 107 dB and consumes 620 μW of power. The light-emitting diode (LED) driver block provides a peak current of 20 mA for optical excitation. The rectifier, the core of the wireless power transmission, operates with 63% power conversion efficiency at 13.56 MHz and a maximum of 87% at 2 MHz. The system is validated in a laboratory bench test environment and compared with state-of-the-art technologies. The optical excitation and recording front end and the wireless power transfer circuit evaluated in this paper will form the basis for a future miniaturized final device with a shank that can be used in in vivo experiments.
使用荧光传感器可视化神经元激活和神经递质释放越来越受欢迎。当代多色或多区域光纤光度测量系统的主要缺点是其束缚结构,这会阻碍动物的自由活动。尽管存在无线光度测量设备,但文献综述表明,这些设备只能同时以单一波长进行光学刺激或激发,并且电池寿命较短。为了解决这一限制,我们展示了一种用于实现具有多色和多区域功能的全无线光度测量系统的原型。本文介绍了一种采用台积电180纳米互补金属氧化物半导体(CMOS)工艺技术制造的集成电路(IC)原型。该原型包括3通道光学激发、2通道光学记录、无线功率传输和无线数据遥测模块。记录前端的平均增益为107分贝,功耗为620微瓦。发光二极管(LED)驱动模块为光学激发提供20毫安的峰值电流。无线功率传输的核心整流器在13.56兆赫兹时的功率转换效率为63%,在2兆赫兹时最高可达87%。该系统在实验室台架测试环境中得到验证,并与现有技术进行了比较。本文评估的光学激发和记录前端以及无线功率传输电路将为未来可用于体内实验的带有柄的小型化最终设备奠定基础。