Suppr超能文献

在聚合诱导自组装过程中调节核形成嵌段的玻璃化转变温度:甲基丙烯酸月桂酯与甲基丙烯酸甲酯的统计共聚可制备出球形、蠕虫状和囊泡状结构。

Tuning the Glass Transition Temperature of a Core-Forming Block during Polymerization-Induced Self-Assembly: Statistical Copolymerization of Lauryl Methacrylate with Methyl Methacrylate Provides Access to Spheres, Worms, and Vesicles.

作者信息

György Csilla, Neal Thomas J, Smith Timothy, Growney David J, Armes Steven P

机构信息

Dainton Building, Department of Chemistry, University of Sheffield, Brook Hill, Sheffield, South Yorkshire S3 7HF, U.K.

Lubrizol Ltd., Nether Lane, Hazelwood, Derbyshire DE56 4AN, U.K.

出版信息

Macromolecules. 2022 May 24;55(10):4091-4101. doi: 10.1021/acs.macromol.2c00475. Epub 2022 May 11.

Abstract

A series of poly(lauryl methacrylate)-poly(methyl methacrylate--lauryl methacrylate) (PLMA -P(MMA--LMA) ) diblock copolymer nanoparticles were synthesized via RAFT dispersion copolymerization of 90 mol % methyl methacrylate (MMA) with 10 mol % lauryl methacrylate (LMA) in mineral oil by using a poly(lauryl methacrylate) (PLMA) precursor with a mean degree of polymerization (DP) of either 22 or 41. H NMR studies of the copolymerization kinetics suggested an overall comonomer conversion of 94% within 2.5 h. GPC analysis confirmed a relatively narrow molecular weight distribution ( / ≤ 1.35) for each diblock copolymer. Recently, we reported an unexpected morphology constraint when targeting PLMA-PMMA nano-objects in mineral oil, with the formation of kinetically trapped spheres being attributed to the relatively high glass transition temperature ( ) of the PMMA block. Herein we demonstrate that this limitation can be overcome by (i) incorporating 10 mol % LMA into the core-forming block and (ii) performing such syntheses at 115 °C. This new strategy produced well-defined spheres, worms, or vesicles when using the same PLMA precursor. Introducing the LMA comonomer not only enhances the mobility of the core-forming copolymer chains by increasing their solvent plasticization but also reduces their effective glass transition temperature to well below the reaction temperature. Copolymer morphologies were initially assigned via transmission electron microscopy (TEM) studies and subsequently confirmed via small-angle X-ray scattering analysis. The thermoresponsive behavior of PLMA-P(0.9MMA--0.1LMA) worms and PLMA-P(0.9MMA--0.1LMA) vesicles was also studied by using dynamic light scattering (DLS) and TEM. The former copolymer underwent a worm-to-sphere transition on heating from 20 to 170 °C while a vesicle-to-worm transition was observed for the latter. Such thermal transitions were irreversible at 0.1% w/w solids but proved to be reversible at 20% w/w solids.

摘要

通过可逆加成-断裂链转移(RAFT)分散共聚法,以平均聚合度(DP)为22或41的聚(甲基丙烯酸月桂酯)(PLMA)为前驱体,在矿物油中使90摩尔%的甲基丙烯酸甲酯(MMA)与10摩尔%的甲基丙烯酸月桂酯(LMA)进行反应,合成了一系列聚(甲基丙烯酸月桂酯)-聚(甲基丙烯酸甲酯-甲基丙烯酸月桂酯)(PLMA -P(MMA-LMA))二嵌段共聚物纳米颗粒。共聚动力学的1H NMR研究表明,在2.5小时内单体的总体转化率为94%。凝胶渗透色谱(GPC)分析证实,每种二嵌段共聚物的分子量分布相对较窄(Đ≤1.35)。最近,我们报道了在矿物油中制备PLMA-PMMA纳米物体时出现的意外形态限制,动力学捕获球体的形成归因于PMMA嵌段相对较高的玻璃化转变温度(Tg)。在此,我们证明可以通过以下方法克服这一限制:(i)在形成核的嵌段中加入10摩尔%的LMA;(ii)在115℃下进行此类合成。当使用相同的PLMA前驱体时,这种新策略产生了形状明确的球体、蠕虫状物体或囊泡。引入LMA共聚单体不仅通过增加溶剂增塑作用提高了形成核的共聚物链的流动性,还将其有效玻璃化转变温度降低至远低于反应温度。共聚物形态最初通过透射电子显微镜(TEM)研究确定,随后通过小角X射线散射分析得到证实。还使用动态光散射(DLS)和TEM研究了PLMA-P(0.9MMA-0.1LMA)蠕虫状物体和PLMA-P(0.9MMA-0.1LMA)囊泡的热响应行为。前一种共聚物在从20℃加热到170℃时经历了从蠕虫状物体到球体的转变,而后一种则观察到从囊泡到蠕虫状物体的转变。这种热转变在固含量为0.1%(w/w)时是不可逆的,但在固含量为20%(w/w)时被证明是可逆的。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/1dad/9134497/21a6e0b784b7/ma2c00475_0010.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验