Environmental Engineering Program, University of Colorado Boulder, 428 UCB, Boulder, CO 80309, USA.
Environmental Engineering Program, University of Colorado Boulder, 428 UCB, Boulder, CO 80309, USA.
Water Res. 2022 Jul 15;220:118643. doi: 10.1016/j.watres.2022.118643. Epub 2022 May 21.
For the potable reuse of municipal wastewater effluent, carbon based advanced treatment (CBAT) using coagulation, ozonation, biofiltration and/or granular activated carbon (GAC) adsorption is a promising approach for controlling disinfection byproduct (DBP) formation. However, CBAT can also favor a shift in DBP formation to more toxic brominated DBP species. To protect public health, treatment-specific DBP formation and speciation trends need to be identified and understood. First, this study systematically evaluated the treatment of six wastewater effluents with four CBAT process trains (experimental n was 55) and measured DBP formation and speciation trends. Overall, CBAT decreased DBP formation by >90% and GAC preferentially removed highly-reactive effluent organic matter as indicated by lower yields of both highly-forming and highly-toxic classes of carbonaceous and nitrogenous DBPs. Since GAC treatment also induced systematic speciation changes by increasing the ratio of bromide to dissolved organic matter, the second part of this study focused on understanding the health impacts of DBP speciation changes on calculated additive toxicity (CAT). Based on the evaluation of 20 DBPs, measured using established methods, the CAT values from cyto- and genotoxicity metrics decreased by as much as 85% due to high levels of precursor removal by GAC. Expanding the evaluation to include 52 DBPs, measured using more extensive analytical methods, resulted in the same conclusions. This study also developed a "speciation potency" metric, that re-scales class-by-class speciation trends using toxic potency factors (e.g., cytotoxicity [LC]). The observed shifts in DBP speciation after treatment increased the class-level toxic potency factors by up to a factor of 4; a greater amount of precursor removal is required for treatment to reduce toxicity, which was achieved with CBAT trains. This proposed approach of combining speciation potency with DBP yields enables evaluation of DBP-associated risk with easily measured surrogates (i.e., bromide and dissolved organic carbon [DOC]). By identifying and quantitatively comparing DBP formation and speciation trends over multiple wastewater effluents and treatment trains, this study demonstrates that CBAT can be a robust approach to DBP precursor removal for potable reuse.
对于市政污水的饮用再利用,使用混凝、臭氧、生物过滤和/或颗粒活性炭(GAC)吸附的基于碳的高级处理(CBAT)是控制消毒副产物(DBP)形成的一种有前途的方法。然而,CBAT 也可能有利于 DBP 形成向更具毒性的溴代 DBP 物种的转变。为了保护公众健康,需要确定和理解特定于处理的 DBP 形成和形态变化趋势。首先,本研究系统地评估了用四种 CBAT 工艺(实验 n = 55)处理六种废水的效果,并测量了 DBP 的形成和形态变化趋势。总体而言,CBAT 将 DBP 的形成降低了>90%,并且 GAC 优先去除了高反应性的出水中的有机物,这表明碳质和含氮 DBP 的高形成和高毒性类别的产率较低。由于 GAC 处理还通过增加溴化物与溶解有机物的比例引起了系统的形态变化,因此本研究的第二部分侧重于了解 DBP 形态变化对计算附加毒性(CAT)的健康影响。基于使用既定方法测量的 20 种 DBP 的评估,由于 GAC 对前体的高去除率,细胞毒性和遗传毒性指标的 CAT 值降低了多达 85%。将评估扩展到使用更广泛的分析方法测量的 52 种 DBP,得出了相同的结论。本研究还开发了一种“形态学效力”指标,该指标使用毒性效力因子(例如细胞毒性[LC])重新调整了逐类形态学趋势。处理后 DBP 形态的变化增加了类水平毒性效力因子高达 4 倍;需要更多的前体去除来减少毒性,这是通过 CBAT 列车实现的。这种结合形态学效力和 DBP 产率的方法可以使用易于测量的替代物(即溴化物和溶解有机碳[DOC])来评估与 DBP 相关的风险。通过识别和定量比较多个废水和处理列车的 DBP 形成和形态变化趋势,本研究表明 CBAT 可以成为饮用水再利用中去除 DBP 前体的一种可靠方法。