Zou Diyang, Hu Xiangjun, An Kai-Nan, Dai Kerong, Yu Xiaowei, Gong Weihua, Tsai Tsung-Yuan
School of Biomedical Engineering & Med-X Research Institute, Shanghai Jiao Tong University, Shanghai, China.
Engineering Research Center of Digital Medicine and Clinical Translation, Ministry of Education, Shanghai, China.
Front Bioeng Biotechnol. 2022 Jun 24;10:850198. doi: 10.3389/fbioe.2022.850198. eCollection 2022.
The complexity of the spatial dynamic flexion axis (DFA) of the elbow joint makes the elbow prosthesis design and humeral component alignment challenging. This study aimed to 1) investigate the variations of the spatial DFA during elbow flexion and 2) investigate the relationship between the distal humeral trochlear geometry and the spatial variation of the DFA. Ten healthy subjects participated in this study. Each subject performed a full elbow extension to maximum flexion with hand supination under dual fluoroscopic imaging system (DFIS) surveillance. The 2D fluoroscopic images and the 3D bone models were registered to analyze the elbow kinematics and DFAs. The spatial DFA positions were defined as inclination with the medial and lateral epicondyle axes (MLA) in the transverse and coronal planes. The range of the DFA positions was also investigated during different flexion phases. The Spearman correlation method was used to analyze the relationship between the distal humeral trochlear's morphological parameters and the position of DFAs during different flexion phases. The pathway of the DFAs showed an irregular pattern and presented individual features. The medial trochlear depth (MTD) ( = 0.68, = 0.03) was positively correlated with the range of the DFA position (2.8° ± 1.9°) in the coronal plane from full extension to 30° of flexion. Lateral trochlear height (LTH) ( = -0.64, = 0.04) was negatively correlated with the DFA position (-1.4° ± 3.3°) in the transverse plane from 30° to 60° of flexion. A significant correlation was found between LTH with the DFA position in the coronal ( = -0.77, = 0.01) and transverse planes ( = -0.76, = 0.01) from 60° to 90° of flexion. This study showed that the pathway of the dynamic flexion axis has an individual pattern. The medial and lateral trochlear sizes were the key parameters that might affect the elbow joint flexion function. When recovering complex distal humeral fractures or considering the implant design of total elbow arthroplasty, surgeons should pay more attention to the medial and lateral trochlea's geometry, which may help restore normal elbow kinematics.
肘关节空间动态屈伸轴(DFA)的复杂性使得肘关节假体设计和肱骨组件对线颇具挑战性。本研究旨在:1)探究肘关节屈伸过程中空间DFA的变化;2)研究肱骨远端滑车几何形状与DFA空间变化之间的关系。十名健康受试者参与了本研究。每位受试者在双荧光透视成像系统(DFIS)监测下进行从完全伸肘到最大屈肘并伴有手部旋后的动作。对二维荧光透视图像和三维骨骼模型进行配准,以分析肘关节运动学和DFA。空间DFA位置定义为在横断面和冠状面内相对于内外上髁轴(MLA)的倾斜度。还研究了不同屈曲阶段DFA位置的范围。采用Spearman相关方法分析肱骨远端滑车形态学参数与不同屈曲阶段DFA位置之间的关系。DFA的轨迹呈现出不规则模式并具有个体特征。内侧滑车深度(MTD)(r = 0.68,P = 0.03)与从完全伸肘到屈曲30°时冠状面内DFA位置范围(2.8°±1.9°)呈正相关。外侧滑车高度(LTH)(r = -0.64,P = 0.04)与从屈曲30°到60°时横断面内DFA位置(-1.4°±3.3°)呈负相关。在屈曲60°到90°时,发现LTH与冠状面(r = -0.77,P = 0.01)和横断面(r = -0.76,P = 0.01)内的DFA位置之间存在显著相关性。本研究表明动态屈伸轴的轨迹具有个体模式。内侧和外侧滑车大小是可能影响肘关节屈曲功能的关键参数。在修复复杂的肱骨远端骨折或考虑全肘关节置换的植入物设计时,外科医生应更加关注内侧和外侧滑车的几何形状,这可能有助于恢复正常的肘关节运动学。