Department of Orthopaedics and Trauma Surgery, Musculoskeletal University Center Munich (MUM), University Hospital, LMU Munich, Munich, Germany.
Arch Orthop Trauma Surg. 2023 Jun;143(6):3111-3117. doi: 10.1007/s00402-022-04547-6. Epub 2022 Jul 13.
Current gold standard for the treatment of symphyseal disruptions includes anterior plating, almost entirely prohibiting symphyseal mobility and resulting in an iatrogenic arthrodesis followed by high rates of implant failure. Minimally invasive tape suture constructs have been found to maintain the micro mobility of ligamentous injuries, yet still providing sufficient biomechanical stability. Recently, this technique has been primarily investigated for symphyseal disruptions on synthetic pelvic models. Therefore, the aim of this study was to examine the feasibility of this novel flexible osteosynthesis on cadaveric pelvic models based on the following hypothesis: tape suture constructs ensure sufficient biomechanical stability without inhibiting micro mobility of the pubic symphysis for the treatment of symphyseal disruptions and maintain stability during long-term loading.
9 cadaveric anterior pelvic rings were used in this study and a symphyseal disruption was created in every specimen. The specimens were then exposed to short- and long-term vertical and horizontal cyclic loading after treatment with a tape suture construct in criss-cross technique. The mean maximum displacement (mm) during cyclic loading and the corresponding stiffness (N/mm) were measured and compared.
Regarding both displacement (mm) and corresponding stiffness (N/mm), the tape sutures displayed a significant difference between short- and long-term loading for cranial and caudal vertical loading (p < 0.01) but differences remained non-significant for horizontal loading (p > 0.05). No tape suture suffered from implant failure during long-term loading.
The tape suture construct displayed sufficient biomechanical stability without exceeding the physiological mobility of 2 mm of the pubic symphysis; however, also maintained the desired micro mobility of the affected joint necessary to prevent an iatrogenic arthrodesis. Further, all tape sutures maintained stability throughout long-term loading.
目前治疗耻骨联合分离的金标准包括前板固定,几乎完全禁止耻骨联合活动,导致医源性融合,随后植入物失败率很高。微创带线缝合结构已被发现可维持韧带损伤的微小活动度,同时仍提供足够的生物力学稳定性。最近,这种技术主要在合成骨盆模型上研究用于治疗耻骨联合分离。因此,本研究旨在基于以下假设,在前骨盆环尸体模型上检查这种新型柔性骨合成术的可行性:带线缝合结构可确保足够的生物力学稳定性,而不会抑制耻骨联合的微小活动度,从而治疗耻骨联合分离,并在长期负重过程中保持稳定性。
本研究使用了 9 个尸体前骨盆环,每个标本均创建了耻骨联合分离。然后,在用十字交叉技术的带线缝合结构治疗后,对标本进行短期和长期垂直和水平循环加载。测量并比较循环加载过程中的平均最大位移(mm)和相应的刚度(N/mm)。
就位移(mm)和相应的刚度(N/mm)而言,带线缝合在颅侧和尾侧垂直加载的短期和长期加载之间存在显著差异(p<0.01),但水平加载之间的差异仍无统计学意义(p>0.05)。在长期加载过程中,没有带线缝合发生植入物失效。
带线缝合结构显示出足够的生物力学稳定性,不会超过耻骨联合 2mm 的生理活动度;然而,它也维持了受影响关节所需的期望的微小活动度,以防止医源性融合。此外,所有带线缝合在长期加载过程中均保持稳定。