Torres Stephen J, Nelson Trevor J, Pham Nathalie, Uffmann William, Limpisvasti Orr, Metzger Melodie F
Cedars-Sinai Kerlan-Jobe Institute, Los Angeles, California.
Cedars-Sinai Orthopaedic Biomechanics Laboratory, Los Angeles, California.
Arthrosc Sports Med Rehabil. 2022 Jun 28;4(4):e1253-e1259. doi: 10.1016/j.asmr.2022.02.008. eCollection 2022 Aug.
To determine the postsurgical strength and stiffness of anterior cruciate ligament (ACL) reconstructions with (ACLR-SA) and without suture tape augmentation (ACLR) in a human cadaveric model.
Eight matched pairs of cadaveric knees were tested intact and after bone-patellar tendon-bone ACL reconstruction. Specimens were potted and loaded onto a mechanical testing system, and an anterior drawer force of 88N was applied at 0°, 15°, 30°, 60°, and 90° of flexion. Specimens were then loaded to failure, with clinical failure defined as anterior translation greater than 10 mm.
ACL-intact knees translated an average of 4.99 ± 0.28 mm across all flexion angles when an 88N anterior load was applied. ACLR knees had significantly greater translation compared to intact specimens. ACLRs with suture augmentation had less of an increase (0.67 mm, 95% confidence interval [CI]: 0.20, 1.14, < .01) than those without suture augmentation (1.42 mm, 95% CI: 0.95, 1.89, < .001). ACLR-SA required greater anterior load (170.4 ± 38.1 N) to reach clinical failure compared to ACLR alone (141.8 ± 51.2 N), = .042. In addition, stiffness of ACLR-SA constructs (23.5 ± 3.3) were significantly greater than ACLR alone (20.3 ± 3.9), = .003.
Augmentation of ACLR with suture tape allowed full range of motion with improved graft stiffness and increased failure load compared to unaugmented ACLR in this time-zero study.
Internal bracing may help reinforce ACLR grafts and allow for acceleration of rehabilitation protocols and earlier return to activity.
在人体尸体模型中确定使用(ACLR-SA)和不使用缝线带增强(ACLR)的前交叉韧带(ACL)重建术后的强度和刚度。
对八对匹配的尸体膝关节进行完整测试以及髌腱骨ACL重建术后测试。将标本装入测试装置并加载到机械测试系统上,在0°、15°、30°、60°和90°屈曲位施加88N的前抽屉力。然后将标本加载至失效,临床失效定义为前向移位大于10mm。
当施加88N前向负荷时,完整ACL的膝关节在所有屈曲角度下平均移位4.99±0.28mm。与完整标本相比,ACLR膝关节的移位明显更大。使用缝线增强的ACLR与未使用缝线增强的ACLR相比,移位增加较少(0.67mm,95%置信区间[CI]:0.20,1.14,P<.01)(1.42mm,95%CI:0.95,1.89,P<.001)。与单独的ACLR(141.8±51.2N)相比,ACLR-SA达到临床失效需要更大的前向负荷(170.4±38.1N),P = .042。此外,ACLR-SA结构的刚度(23.5±3.3)明显大于单独的ACLR(二十点三±3.9),P = .003。
在这项零时研究中,与未增强的ACLR相比,使用缝线带增强ACLR可实现全范围运动,提高移植物刚度并增加失效负荷。
内部支撑可能有助于加强ACLR移植物,并允许加速康复方案并更早恢复活动。