Troestch Jose, Reyes Stephany, Vega Aracelly
Centro de Investigación en Recursos Naturales, Universidad Autónoma de Chiriquí, David 0427, Chiriquí, Panama.
J Toxicol. 2022 Sep 2;2022:3596768. doi: 10.1155/2022/3596768. eCollection 2022.
The contamination by aflatoxins, ochratoxin A, and zearalenone of samples of paddy and polished rice stored in silos located in Chiriquí, Panama, was evaluated. A total of 23 samples were extracted using immunoaffinity columns and analyzed by high-performance liquid chromatography (HPLC) with a fluorescence detector (FLD) and post-column photochemical derivatization. For the method used, the detection limits were lower than 0.25 g/Kg for aflatoxins (AFB, AFB, AFG, AFG) and ochratoxin A and 9.35 g/Kg for zearalenone; the limits of quantification were between 0.25 and 18.75 g/Kg, respectively. Of the samples analyzed, all of the paddy rice samples were positive for at least one of the mycotoxins studied, zearalenone being the one found with the highest incidence (90.91%); for the polished rice samples, the mycotoxin with the highest incidence was zearalenone (50%), although in concentrations lower than those established in European legislation (100 g/Kg). The estimate of the daily zearalenone intake according to the concentrations found was always less than 0.07 g/Kg/bw. This is the first report on the determination of 6 mycotoxins in rice grains from Panama by the HPLC-FLD methodology. Considering the high incidence of mycotoxins in the analyzed rice samples, regular control in the production process is recommended to improve quality and ascertain its safety.
对巴拿马奇里基省储存在筒仓中的稻谷和精米样本中的黄曲霉毒素、赭曲霉毒素A和玉米赤霉烯酮污染情况进行了评估。总共23个样本通过免疫亲和柱提取,并采用配备荧光检测器(FLD)和柱后光化学衍生化的高效液相色谱法(HPLC)进行分析。对于所使用的方法,黄曲霉毒素(AFB、AFB、AFG、AFG)和赭曲霉毒素A的检测限低于0.25 μg/Kg,玉米赤霉烯酮的检测限为9.35 μg/Kg;定量限分别在0.25至18.75 μg/Kg之间。在所分析的样本中,所有稻谷样本至少对一种所研究的霉菌毒素呈阳性,玉米赤霉烯酮的检出率最高(90.91%);对于精米样本,检出率最高的霉菌毒素是玉米赤霉烯酮(50%),尽管其浓度低于欧洲法规规定的浓度(100 μg/Kg)。根据所发现的浓度估算的玉米赤霉烯酮每日摄入量始终低于0.07 μg/Kg/bw。这是关于采用HPLC - FLD方法测定巴拿马稻谷中6种霉菌毒素的首份报告。鉴于所分析的大米样本中霉菌毒素的高检出率,建议在生产过程中进行定期控制,以提高质量并确定其安全性。