Contamination of food crops by unintentionally released PCB 47, PCB 51 and PCB 68 in the vicinity of silicone production sites and their relevance for human health assessment.

Since it was shown that silicone rubber production can unintentionally release PCBs, these production sites have become a focus of investigation. The use of the cross-linking agent bis(2,4)-dichlorobenzoylperoxide (2,4-DCBP) can lead to emissions of the PCB congeners PCB 47, PCB 51 and PCB 68 into the environment and cause their accumulation e. g. in food crops. To determine the presence and extent of this uptake, we used the newly developed method dandelion screening. Samples were taken from wild dandelion plants near nine production sites in North Rhine-Westphalia, Germany, and analysed for PCBs. In some cases, the regional orientation values for the maximum background level (OMB) were exceeded by up to nine times. Overall, background levels were exceeded at seven of the nine sites investigated and mitigation measures were initiated at the production sites. In order to validate the dandelion screening results, kale was exposed, which allowed for a health assessment. A wide-ranging consumption recommendation was then issued in four out of nine study areas. At this point in the investigations, risk reduction measures had already been implemented at all production sites investigated, so it can be assumed that the exposures at sites not yet in focus are significantly greater. This is a globally relevant problem, as 2,4-DCBP is used in many countries.