Facultad de Ciencias de la Salud, Universidad Católica de Córdoba, Córdoba, Argentina.
Division of Restorative Dental Sciences, Prince Philip Dental Hospital, 34 Hospital Road, Sai Ying Pun, Hong Kong, China.
Sci Rep. 2022 Sep 14;12(1):15418. doi: 10.1038/s41598-022-19757-6.
The aims of the study were: (1) To compare the staining effect on demineralized dentin simulating caries between silver nanoclusters (AgNCls) synthesized using polymethacrylic acid (PMAA) and silver diammine fluoride (SDF), and (2) to measure the shear bond strength (SBS) of a glass ionomer cement (GIC) to simulated caries lesions with and without the application of AgNCls/PMAA or SDF. Dentine blocks 4 mm thick from twenty-four non-carious third molars were sectioned and coated with nail varnish (Revlon, New York, USA). Simulated caries lesions on occlusal dentin surfaces were created (66 h in 0.05 M acetate buffer 2.2 mM calcium/phosphate pH 5.0). Specimens were divided into groups and treated with (n = 8): (A) 20% AgNCls/PMAA; (B) SDF 38% (Fagamin, Tedequim, Córdoba, Argentina); or (C) without treatment. AgNCls/PMAA or SDF were applied on the exposed surfaces with a microbrush for 10 s. Samples were incubated for 24 h at 37 °C at 100% relative humidity. Surface color was measured according to the CIE-Lab* system before and after demineralization (R0 and R1), 24 h and one week after treatment (R2 and R3), using a spectrophotometer (CM-600D Konica Minolta Sesing Inc., Japan). Groups A and B received an extra application of AgNCls/PMAA or SDF before a conventional GIC (Fuji IX-Gold Label, GC Corp, Tokyo, Japan) was bonded using a mold, 4 mm diameter × 3 mm high. For SBS, a Universal Testing Machine (Digimess RS-8000-5, China)-crosshead speed of 1 mm/min-was used. Statistical analysis was performed using ANOVA, Student-t and Scheffe-test at a significance of p < 0.05. Group A presented a stable color p = 0.24 between R1-R2 and R1-R3 in contrast to significant color changes in Group B (p = 0.02). SBS was higher (p < 0.01) in Group A (10.4 ± 2.7 MPa) compared to Groups B (3.3 ± 1.3 MPa) and C (4.0 ± 0.4 MPa), where no differences between the latter groups were observed (p = 0.77). Results of this preliminary study demonstrated that 20% AgNCls/PMAA did not stain simulated carious dentin and improved SBS of the GIC. The relevance of this study relies on the development of a therapeutic system to potentially arrest caries lesions without staining.
(1)比较使用聚甲基丙烯酸(PMAA)合成的银纳米簇(AgNCls)和银双胺氟化物(SDF)对模拟龋损牙本质的染色效果,(2)测量玻璃离子水门汀(GIC)对应用AgNCls/PMAA 或 SDF 前后模拟龋损的剪切结合强度(SBS)。从 24 颗无龋第三磨牙上切下 4 毫米厚的牙本质块,并用指甲油(Revlon,纽约,美国)涂覆。在咬合面牙本质表面创建模拟龋损(0.05 M 醋酸盐缓冲液 2.2 mM 钙/磷酸盐 pH 5.0 66 h)。将标本分为以下几组(n=8):(A)20%AgNCls/PMAA;(B)38%SDF(Fagamin,Tedequim,Córdoba,Argentina);或(C)无处理。用微刷将 AgNCls/PMAA 或 SDF 涂在暴露的表面上 10 s。样品在 37°C 和 100%相对湿度下孵育 24 小时。在脱矿化前后(R0 和 R1)、处理后 24 小时和 1 周(R2 和 R3),使用分光光度计(Konica Minolta Sesing Inc.,日本的 CM-600D)根据 CIE-Lab*系统测量表面颜色。组 A 和 B 在常规 GIC(GC 公司的 Fuji IX-Gold Label,东京,日本)应用前接受额外的 AgNCls/PMAA 或 SDF 应用,使用模具(直径 4 毫米×高 3 毫米)进行粘合。SBS 使用万能试验机(Digimess RS-8000-5,中国)进行,十字头速度为 1 mm/min。使用方差分析、学生 t 检验和 Scheffe 检验对 p<0.05 的显著性进行统计学分析。与组 B(p=0.02)相比,组 A 在 R1-R2 和 R1-R3 之间表现出稳定的颜色(p=0.24),而组 B 则表现出显著的颜色变化。与组 B(3.3±1.3 MPa)和 C(4.0±0.4 MPa)相比,组 A 的 SBS 更高(p<0.01),后两组之间没有差异(p=0.77)。这项初步研究的结果表明,20%AgNCls/PMAA 不会染色模拟龋损牙本质,并提高了 GIC 的 SBS。这项研究的相关性在于开发一种潜在的治疗系统,在不染色的情况下阻止龋损的进展。