Feng Junjun, Jiang Haiyun, Wang Jing, Jing Zhengyi, Zhang Fan, Tan Tianyu, He Feng, Jiang Lihua, Li Haiqin, Chang Shimin, Li Tengfei
College of Life Science and Food Engineering, Hebei University of Engineering, Handan 056038, China.
Food and Drug Inspection Center of Handan City, Handan 056004, China.
Se Pu. 2022 Sep;40(9):843-853. doi: 10.3724/SP.J.1123.2021.12028.
Chromatography combined with mass spectrometry is the most commonly used detection technology, and it offers the advantages of high sensitivity and high selectivity. The quick, easy, inexpensive, effective, rugged, and safe (QuEChERS) method is low-cost, effective, and time efficient. The application of the QuEChERS has now been extended to the analysis of contaminants in food samples. The aim of the study was to identify different concentration levels of multiple harmful drug residues in bean sprouts. In this study, QuEChERS coupled with high performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) was established for the simultaneous determination of 40 plant growth regulators, fungicides, insecticides, and antibiotics in bean sprouts. In the HPLC-MS/MS experiment, gibberellic acid, 4-fluorophenoxyacetic acid, chloramphenicol, 6-(2-isopentenyl)-adenine, 6-benzylaminopurine, 4-chlorophenoxyacetic acid, and 2,4-dichlorophenoxyacetic acid (2,4-D) were analyzed by MS/MS with negative electrospray ionization (ESI). The other 33 target analytes (chlormequat, ronidazole, metronidazole, pymetrozine, dimetridazole, methomyl, carbendazim, enoxacin, levofloxacin, pefloxacin mesylate, norfloxacin, ciprofloxacin, enrofloxacin, thiabendazole, lomefloxacin, chlorpyrifos, sarafloxacin, imidacloprid, etc.) were analyzed by MS/MS with positive electrospray ionization (ESI). Sensitive MS conditions were realized by optimizing the instrumental parameters such as the desolvent temperature, collision energy, spraying needle position, precursor ions, and product ions. Then, the optimal pretreatment method was determined by comparing the recovery rates of the 40 drugs obtained with different extraction solvents (methanol, acetonitrile, acetonitrile containing 0.1% ammonia, acetonitrile with 1% acetic acid), different extraction methods (ultrasonic extraction, shaking extraction), and purification with primary secondary amine (PSA) and C. In this study, the bean sprouts samples were extracted twice by 10 mL acetonitrile with 1% acetic acid, and extracted under ultrasonic conditions. Then, the extracting solution was only cleaned with 100 mg C. The chromatographic separation of the 40 compounds was accomplished on a Waters ACQUITY UPLC BEH C column (100 mm×2.1 mm, 1.7 μm) with gradient elution. Methanol and 0.01% formic acid aqueous solution were used as the mobile phases. The 40 compounds were analyzed in the multiple reaction monitoring (MRM) mode. The matrix matching external standard method was used for quantitative determination. The results showed that the 40 compounds could be analyzed within 15 min. Under the optimized conditions, the calibration curves showed good linearities for the 40 compounds, and the coefficients of determination () were greater than 0.99 in the range of 2-200 μg/L. The limits of detection (LODs) and limits of quantification (LOQs) were in the range of 0.1-3 μg/kg and 0.3-9 μg/kg, respectively. Using negative bean sprouts as the substrates, the recovery tests were carried out at three spiked levels of 5, 10, and 50 μg/kg. The average recoveries of the 40 drugs were 78.5% to 115.3%, and the corresponding relative standard deviations (RSDs) were 1.3% to 9.7% (=6). This method was successfully applied to the analysis of the 40 drug residues in 21 batches of local bean sprouts in Handan city. The results revealed the presence of extensive drug residues in the bean sprouts. The 26 batches were detected to varying degrees, among which 4-chlorophenoxyacetic acid, carbendazim, 6-benzyladenine, 2,4-D, enrofloxacin, and metronidazole were detected at high rates. The detection rates of 4-chlorophenoxyacetic acid, 6-benzyladenine, carbendazim, 2,4-D, gibberellic acid, and enrofloxacin were 28.6%, 19.0%, 9.5%, 9.5%, 4.8%, and 4.8%, respectively. The contents ranged from 37.5-352.4, 32.4-273.1, 28.8-38.7, 316.1-20.2, 19.9 and 13.6 μg/kg, respectively. Given its advantages of simplicity, rapidness, and high sensitivity, the developed method can be used for the rapid and accurate determination of trace levels of the 40 drug residues in large quantities of bean sprouts.
色谱联用质谱是最常用的检测技术,具有高灵敏度和高选择性的优点。快速、简便、廉价、高效、耐用和安全(QuEChERS)方法成本低、效率高且省时。QuEChERS的应用现已扩展到食品样品中污染物的分析。本研究的目的是确定豆芽中多种有害药物残留的不同浓度水平。在本研究中,建立了QuEChERS与高效液相色谱 - 串联质谱(HPLC - MS/MS)联用的方法,用于同时测定豆芽中的40种植物生长调节剂、杀菌剂、杀虫剂和抗生素。在HPLC - MS/MS实验中,赤霉酸、4 - 氟苯氧乙酸、氯霉素、6 - (2 - 异戊烯基) - 腺嘌呤、6 - 苄氨基嘌呤、4 - 氯苯氧乙酸和2,4 - 二氯苯氧乙酸(2,4 - D)通过负电喷雾电离(ESI)的MS/MS进行分析。其他33种目标分析物(矮壮素、甲硝唑、甲硝唑、吡蚜酮、二甲硝唑、灭多威、多菌灵、恩诺沙星、左氧氟沙星、甲磺酸培氟沙星、诺氟沙星、环丙沙星、恩诺沙星、噻苯达唑、洛美沙星、毒死蜱、沙拉沙星、吡虫啉等)通过正电喷雾电离(ESI)的MS/MS进行分析。通过优化诸如脱溶剂温度、碰撞能量、喷雾针位置、母离子和子离子等仪器参数,实现了灵敏的质谱条件。然后,通过比较用不同萃取溶剂(甲醇、乙腈、含0.1%氨的乙腈、含1%乙酸的乙腈)、不同萃取方法(超声萃取、振荡萃取)以及用伯仲胺(PSA)和C进行净化所获得的40种药物的回收率,确定了最佳预处理方法。在本研究中,豆芽样品用10 mL含1%乙酸的乙腈萃取两次,并在超声条件下萃取。然后,萃取液仅用100 mg C进行净化。40种化合物的色谱分离在Waters ACQUITY UPLC BEH C柱(100 mm×2.1 mm,1.7 μm)上通过梯度洗脱完成。甲醇和0.01%甲酸水溶液用作流动相。40种化合物在多反应监测(MRM)模式下进行分析。采用基质匹配外标法进行定量测定。结果表明,40种化合物可在15分钟内分析完毕。在优化条件下,校准曲线对40种化合物显示出良好的线性关系,在2 - 200 μg/L范围内的测定系数()大于0.99。检测限(LOD)和定量限(LOQ)分别在0.1 - 3 μg/kg和0.3 - 9 μg/kg范围内。以阴性豆芽为基质,在5、10和50 μg/kg三个加标水平下进行回收率试验。40种药物的平均回收率为78.5%至115.3%,相应的相对标准偏差(RSD)为1.3%至9.7%(=6)。该方法成功应用于邯郸市21批次当地豆芽中40种药物残留的分析。结果表明豆芽中存在大量药物残留。26批次豆芽被不同程度地检测到,其中4 - 氯苯氧乙酸、多菌灵、6 - 苄基腺嘌呤、2,4 - D、恩诺沙星和甲硝唑的检出率较高。4 - 氯苯氧乙酸、6 - 苄基腺嘌呤、多菌灵、2,4 - D、赤霉酸和恩诺沙星的检出率分别为28.6%、19.0%、9.5%、9.5%、4.8%和4.8%。含量分别为37.5 - 352.4、32.4 - 273.1、28.8 - 38.7、316.1 - 20.2、19.9和13.6 μg/kg。鉴于其简便、快速和高灵敏度的优点,所建立的方法可用于大量豆芽中痕量水平的40种药物残留的快速准确测定。