Departamento de Ciencias Básicas, Instituto Tecnológico de San Luis Potosí, Tecnológico Nacional de México, 78437, San Luis Potosí, Mexico.
Departamento de Eléctrica, Electrónica y Mecatrónica, Instituto Tecnológico de San Luis Potosí, Tecnológico Nacional de México, 78437, San Luis Potosí, Mexico.
Sci Rep. 2022 Oct 8;12(1):16935. doi: 10.1038/s41598-022-20801-8.
A biomaterial made of coir and Multi-Walled Carbon Nanotubes (MWCNTs) is presented which exhibits a relatively high-Temperature Coefficient of Resistance (TCR) and thermal insulation properties. Bolometers usually offer acceptable thermal isolation, electrical resistance, and high TCR. Fibers from agricultural waste materials such as coir has a synergistic effect as thermal insulating material and noise reducer. Based on it, powdered coir pills were used as pilot samples, as well as 2 other samples with different dispersions of MWCNTs, sodium dodecyl benzene sulfonate (SDBS) and polyvinylpyrrolidone (PVP) solution. The 3 kinds of samples were thermo-electrically characterized to determine their bolometric performance. Thermal conductivity of k = 0.045 W/m K was obtained by solving the Fourier's law substituting the data into the equation describing heat flux on the sample around room temperature. Results show that adding different concentrations of MWCNT to powdered coir will lead to films with lower electrical resistance, therefore the thermal conductivity increases while thermal resistance decreases. Finally, the bolometric performance shows a maximum peak with a relatively high TCR of - 40.4% at a temperature of 300.3 K, this synthesized material outperforms by almost 1 order of magnitude larger than commercial materials. Results in this work also indicate that it is possible to tune bolometric parameters of this kind of samples and to use them as thermal insulators in the construction industry, when building roofs and walls.
一种由椰壳纤维和多壁碳纳米管(MWCNTs)制成的生物材料具有较高的电阻温度系数(TCR)和隔热性能。测辐射热计通常具有可接受的热隔离、电阻和高 TCR。农业废料如椰壳纤维的纤维作为隔热材料和降噪剂具有协同作用。基于此,椰壳纤维粉末丸被用作初步的样本,以及另外 2 种具有不同 MWCNTs、十二烷基苯磺酸钠(SDBS)和聚乙烯吡咯烷酮(PVP)溶液分散度的样本。这 3 种样本进行了热电特性分析,以确定其测辐射热计性能。通过求解傅里叶定律,并将数据代入描述室温下样品热通量的方程,得到了热导率 k = 0.045 W/m·K。结果表明,向椰壳纤维粉末中添加不同浓度的 MWCNT 会导致薄膜的电阻降低,从而使热导率增加,热阻降低。最终,在 300.3 K 的温度下,这种合成材料表现出最大峰值,具有相对较高的 TCR(-40.4%)。这种合成材料的性能比商业材料高出近一个数量级。本工作的结果还表明,有可能调整这种样品的测辐射热计参数,并将其用作建筑行业屋顶和墙壁的隔热材料。