School of Chemistry and Chemical Engineering, University of Jinan, Jinan 250022, China.
School of Materials Science and Engineering, Nanyang Technological University, Singapore 639798, Singapore.
Biosensors (Basel). 2022 Oct 2;12(10):818. doi: 10.3390/bios12100818.
Nowadays, developing a cost-effective, easy-to-operate, and efficient signal amplification platform is of important to microfluidic paper-based analytical devices (PAD) for end-use markets of point-of-care (POC) assay applications. Herein, an ultrasensitive, paper-based photoelectrochemical (PEC) bioassay platform is constructed by in situ grown ZnO/ZnInS heterojunctions onto paper fibers, which acted as photoactive signal amplification probes for enhancing the sensitivity of antibodies-based diagnostic assays, for the sensitive detection of alpha-fetoprotein (AFP) targets. The crystalline flake-like ZnInS composited with hexagonal nanorods (NRs) morphology of ZnO is an in situ grown, at the first time, onto cellulose fibers surface supported with Au nanoparticle (Au NP) modification to improve conductivity of the device working zone. The obtained composites on paper fibers are implemented as a flexible paper-based photoelectrode to realize remarkable performance of the fabricated PAD, resulting from the enhanced PEC activity of heterojunctions with effective electron-hole pair separation for accelerating photoelectric conversion efficiency of the sensing process under light irradiation. Once the target AFP was introduced into the biosensing interface assistant, with a specific recognition interaction of AFP antibody, a drastically photocurrent response was generated, in view of the apparent steric effects. With the concentration increase of AFP targets, more immune conjugates could be confined onto the biosensing interface, eventually leading to the quantitative decrease of photocurrent intensity. Combined with an ingenious origami design and permitting the hydrophobic/hydrophilic conversion procedure in the bioassay process, the ultrasensitive PEC detection of AFP targets was realized. Under the optimized conditions, the level of AFP could be sensitively tracked by the prepared PAD with a liner range from 0.1 to 100 ng mL and limit of detection of 0.03 ng mL. This work provides a great potential application for highly selective and sensitive POC testing of AFP, and finally, developments for clinical disease diagnosis.
如今,开发一种经济高效、易于操作且高效的信号放大平台对于用于即时检测 (POC) 分析应用的微流控纸基分析器件 (PAD) 至关重要。在此,通过在纸纤维上原位生长 ZnO/ZnInS 异质结,构建了一种超灵敏的基于纸的光电化学 (PEC) 生物分析平台,该平台用作基于抗体的诊断分析的光活性信号放大探针,用于灵敏检测甲胎蛋白 (AFP) 靶标。片状的 ZnInS 与 ZnO 的六方纳米棒 (NR) 形态的复合是首次原位生长在带有金纳米颗粒 (Au NP) 修饰的纤维素纤维表面上,以提高器件工作区的导电性。在纤维上获得的复合材料被用作柔性纸基光电极,以实现所制备的 PAD 的出色性能,这是由于异质结的 PEC 活性增强,有效电子-空穴对分离,从而加速了传感过程中的光电转换效率在光照射下。一旦将目标 AFP 引入到生物传感界面辅助中,由于 AFP 抗体的特异性识别相互作用,会产生明显的光电流响应,这是由于明显的空间位阻效应。随着 AFP 靶标浓度的增加,更多的免疫偶联物可以被限制在生物传感界面上,最终导致光电流强度的定量减少。结合巧妙的折纸设计,并允许在生物分析过程中进行疏水性/亲水性转换过程,实现了 AFP 目标的超灵敏 PEC 检测。在优化条件下,通过制备的 PAD 可以灵敏地跟踪 AFP 的水平,线性范围从 0.1 到 100 ng mL,检测限为 0.03 ng mL。这项工作为高度选择性和灵敏的即时检测 AFP 提供了巨大的潜在应用,并最终为临床疾病诊断提供了发展。