Kollipara Vamshi, Peddakrishna Samineni
School of Electronics Engineering, VIT-AP University, Amaravati 522237, India.
Sensors (Basel). 2022 Oct 19;22(20):7972. doi: 10.3390/s22207972.
This article studies a quad-port multi-input-multi-output (MIMO) circularly polarized antenna with good isolation properties. Using characteristic mode analysis (CMA), the first six distinct modes of the asymmetric square slot with an inverted L-strip are analyzed. In this study, modal parameter extraction is carried out for circular polarization (CP) radiation. A simple annular ring microstrip feed is excited to obtain broadband CP based on CMA. The single-unit feeding structure is replicated orthogonally four times to achieve a CP MIMO antenna. This antenna provides port isolation of more than 21 dB without the use of an additional decoupling element. The quad-port CP-MIMO antenna is simulated with a total dimension of 50 × 50 mm2. The antenna attains impedance matching (S11 < −10 dB) from 5.37 GHz to beyond 11 GHz with an axial ratio bandwidth (ARBW) of 4.65 GHz (5.61 GHz to 10.26 GHz). The peak realized gain of the MIMO antenna is measured at 5.69 dBi at 8.4 GHz. Additionally, the diversity performance parameters of the MIMO structure are computed. The advantages of the proposed structure have been evaluated by comparing it to previously reported MIMO structures. A prototype of the MIMO structure measurements was found to match the simulation results.
本文研究了一种具有良好隔离特性的四端口多输入多输出(MIMO)圆极化天线。利用特征模式分析(CMA),分析了带有倒L形带的不对称方槽的前六种不同模式。在本研究中,对圆极化(CP)辐射进行了模态参数提取。基于CMA,激励一个简单的环形微带馈源以获得宽带CP。单单元馈电结构正交复制四次以实现CP MIMO天线。该天线在不使用额外去耦元件的情况下提供超过21 dB的端口隔离。对四端口CP-MIMO天线进行了仿真,其总尺寸为50×50 mm2。该天线在5.37 GHz至超过11 GHz的频率范围内实现了阻抗匹配(S11 < -10 dB),轴比带宽(ARBW)为4.65 GHz(5.61 GHz至10.26 GHz)。MIMO天线在8.4 GHz时的峰值实现增益测量为5.69 dBi。此外,还计算了MIMO结构的分集性能参数。通过与先前报道的MIMO结构进行比较,评估了所提出结构的优点。发现MIMO结构测量的原型与仿真结果相匹配。