Suppr超能文献

城市集水区中的微塑料:来源、路径及进入雨水的综述

Microplastics in urban catchments: Review of sources, pathways, and entry into stormwater.

作者信息

Österlund Heléne, Blecken Godecke, Lange Katharina, Marsalek Jiri, Gopinath Kalpana, Viklander Maria

机构信息

Urban Water Engineering, Department of Civil, Environmental and Natural Resources Engineering, Luleå University of Technology, 971 87 Luleå, Sweden.

Urban Water Engineering, Department of Civil, Environmental and Natural Resources Engineering, Luleå University of Technology, 971 87 Luleå, Sweden.

出版信息

Sci Total Environ. 2023 Feb 1;858(Pt 1):159781. doi: 10.1016/j.scitotenv.2022.159781. Epub 2022 Oct 26.

Abstract

Urban areas play a key role in the production of microplastics (MPs) and their entry into water bodies. This article reviews the literature on the sources, transport, and control of MPs in urban environments with the aim of clarifying the mechanisms underlying these processes. Major MP sources include atmospheric deposition, micro-litter, and tire and road wear particles (TRWPs). MPs deposited from the atmosphere are mostly fibers and may be particularly important in catchments without traffic. Littering and attrition of textiles and plastic products is another important MP source. However, the quantities of MPs originating from this source may be hard to estimate. TRWPs are a significant source of MPs in urban areas and are arguably the best quantified source. The mobilization of MPs in urban catchments is poorly understood but it appears that dry unconsolidated sediments and MP deposits are most readily mobilized. Sequestration of MPs occurs in green areas and is poorly understood. Consequently, some authors consider green/pervious parts of urban catchments to be MP sinks. Field studies have shown that appreciable MP removal occurs in stormwater quality control facilities. Street cleaning and snow removal also remove MPs (particularly TRWPs), but the efficacy of these measures is unknown. Among stormwater management facilities, biofiltration/retention units seem to remove MPs more effectively than facilities relying on stormwater settling. However, knowledge of MP removal in stormwater facilities remains incomplete. Finally, although 13 research papers reported MP concentrations in stormwater, the total number of field samples examined in these studies was only 189. Moreover, the results of these studies are not necessarily comparable because they are based on relatively small numbers of samples and differ widely in terms of their objectives, sites, analytical methods, size fractions, examined polymers, and even terminology. This area of research can thus be considered "data-poor" and offers great opportunities for further research in many areas.

摘要

城市地区在微塑料(MPs)的产生及其进入水体的过程中起着关键作用。本文综述了关于城市环境中微塑料的来源、迁移和控制的文献,旨在阐明这些过程背后的机制。微塑料的主要来源包括大气沉降、微垃圾以及轮胎和道路磨损颗粒(TRWPs)。大气中沉降的微塑料大多为纤维,在没有交通的集水区可能尤为重要。纺织品和塑料制品的乱扔及磨损是另一个重要的微塑料来源。然而,源于该来源的微塑料数量可能难以估计。轮胎和道路磨损颗粒是城市地区微塑料的重要来源,并且可以说是量化程度最高的来源。城市集水区中微塑料的迁移情况了解甚少,但似乎干燥的未固结沉积物和微塑料沉积物最容易被迁移。微塑料在绿色区域会发生固存,对此了解也很少。因此,一些作者认为城市集水区的绿色/透水部分是微塑料的汇。实地研究表明,雨水质量控制设施能有效去除大量微塑料。街道清扫和除雪也能清除微塑料(特别是轮胎和道路磨损颗粒),但这些措施的效果尚不清楚。在雨水管理设施中,生物过滤/滞留单元似乎比依赖雨水沉淀的设施更有效地去除微塑料。然而,关于雨水设施中微塑料去除的知识仍然不完整。最后,尽管有13篇研究论文报道了雨水中的微塑料浓度,但这些研究中检测到的实地样本总数仅为189个。此外,这些研究结果不一定具有可比性,因为它们基于相对较少的样本数量,并且在目标、地点、分析方法、尺寸分级、检测的聚合物甚至术语方面差异很大。因此,这一研究领域可被视为“数据匮乏”,在许多领域提供了然进一步研究的巨大机会。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验